Saw rebuild and/or porting. Apply within

[farminkarman]

Randy has a good recipe on them too.

 

[Mastermind]

We just rebuilt and ported a MS200T with an 020T top end. Parts being tough to find.....it's what we had to use. Turned out really good. Sadly, I didn't think to get a video before sending it home to the customer.

 

[661joe]

Didn’t know anyone have completely stock top handles for tree work anymore.

I bought a 200t off of lone wolf years and years ago I can say it has last all of 7 years of full production work. 50/75 hrs a week. I have many from lone wolf I haven’t even started because the OG won’t die haha

 

[661joe]

We do a lot of rebuilds and porting on 200s.

What do you have to get for one? Pm if necessary.

 

[Mastermind]

What do you have to get for one? Pm if necessary.

It depends on what it needs of course. Stock rebuilds are 200.00 plus parts on most saws. That includes cleaning every part in an ultrasonic tank, and inspecting every part to be sure we get it fixed right.

 

[661joe]

It depends on what it needs of course. Stock rebuilds are 200.00 plus parts on most saws. That includes cleaning every part in an ultrasonic tank, and inspecting every part to be sure we get it fixed right.

Ported and any parts needed of course. Real gains over stock or not worth it? I know they run better but how much better.

 

[lehman live edge slab]

Ported and any parts needed of course. Real gains over stock or not worth it? I know they run better but how much better.

Lots better and so do the 201’s.

 

[Mastermind]

Ported and any parts needed of course. Real gains over stock or not worth it? I know they run better but how much better.

That is the price of a stock rebuild.

Big gains from porting.

 

[mrxlh]

We just rebuilt and ported a MS200T with an 020T top end. Parts being tough to find.....it's what we had to use. Turned out really good. Sadly, I didn't think to get a video before sending it home to the customer.

JCS (not to stir up anything) swore by using the 020T top ends over the 200T, said he could get better gains/numbers from them. Sounds like that might be one of the few truthful things he actually said…

 

[FergusonTO35]

JCS (not to stir up anything) swore by using the 020T top ends over the 200T, said he could get better gains/numbers from them. Sounds like that might be one of the few truthful things he actually said…

No, you really didn't just say that name...

 

[Woodpecker]

Ported and any parts needed of course. Real gains over stock or not worth it? I know they run better but how much better.

Not that he needs me to rep for him, but I had Randy rebuild a ms400 for me. It came back looking brand new.

 

[jacob j.]

Not that he needs me to rep for him, but I had Randy rebuild a ms400 for me. It came back looking brand new.

Did he dye everything Poulan green?

 

[Mastermind]

Did he dye everything Poulan green?

I only do that on your saws.