Random pics (that you took) thread...

[ChipsFlyin]

The wife took my knife block off the counter and put it way on the other side of the stove to free up counter space. No one has a vertical knife holder so I made one out of junk wood. Laid all my knives out on 1/8 sheet, traced them and cut with jig saw. Attached to back board with small brads. Attached back board from the back with drywall screws and voila. The large knife was a bit thick so turned a chainsaw file backwards , chucked it up and used like a long bur. Couple coats of darker cream colored paint and will hang with 3" screws across the top. A few small brass hooks straight in the face and I can hang some other stuff like scissors and measuring cups.

The cabinet doors makes it to about 110-115 degrees before hitting so plenty of room.

 

[ChipsFlyin]

The wife took my knife block off the counter and put it way on the other side of the stove to free up counter space. No one has a vertical knife holder so I made one out of junk wood. Laid all my knives out on 1/8 sheet, traced them and cut with jig saw. Attached to back board with small brads. Attached back board from the back with drywall screws and voila. The large knife was a bit thick so turned a chainsaw file backwards , chucked it up and used like a long bur. Couple coats of darker cream colored paint and will hang with 3" screws across the top. A few small brass hooks straight in the face and I can hang some other stuff like scissors and measuring cups.
View attachment 196627 View attachment 196628
The cabinet doors makes it to about 110-115 degrees before hitting so plenty of room.

Done. Looks a bit off in the back because nothing in this house comes close to square. Little piece of molding down the road will cover.

 

[Steve]

Done. Looks a bit off in the back because nothing in this house comes close to square. Little piece of molding down the road will cover.
View attachment 196644

That turned out great!

 

[Steve]

How long has it been leaking oil? Not too long right!!!!

 

[birdmeter]

The wife took my knife block off the counter and put it way on the other side of the stove to free up counter space. No one has a vertical knife holder so I made one out of junk wood. Laid all my knives out on 1/8 sheet, traced them and cut with jig saw. Attached to back board with small brads. Attached back board from the back with drywall screws and voila. The large knife was a bit thick so turned a chainsaw file backwards , chucked it up and used like a long bur. Couple coats of darker cream colored paint and will hang with 3" screws across the top. A few small brass hooks straight in the face and I can hang some other stuff like scissors and measuring cups.
View attachment 196627 View attachment 196628
The cabinet doors makes it to about 110-115 degrees before hitting so plenty of room.

thats bad ass.

 

[Bigmac]

How long has it been leaking oil? Not too long right!!!!


View attachment 196652 View attachment 196653 View attachment 196654 View attachment 196655

I am going to guess that there isn’t any corrosion to be found! Lol that’s a mess!

 

[Steve]

I am going to guess that there isn’t any corrosion to be found! Lol that’s a mess!

A half hour with a power washer and change of clothes and its clean! Got it all back together with new seals and gaskets. Ready to live a changed life!

 

[ktmtigger]

Sent from my E6910 using Tapatalk

 

[Bigmac]

A half hour with a power washer and change of clothes and its clean! Got it all back together with new seals and gaskets. Ready to live a changed life!

This is a picture thread, I can’t read! Pics or it didn’t happen! Lol

 

[p61 western]

This is a picture thread, I can’t read! Pics or it didn’t happen! Lol

Lmfao

 

[redline4]

Random

 

[Steve]

Random

View attachment 196712 View attachment 196713 View attachment 196714 View attachment 196715

Nice CEL slacker!



How much boost can gorilla tape hold?



How was Monkeying around this weekend?

 

[Steve]

This is a picture thread, I can’t read! Pics or it didn’t happen! Lol

Stop making fun of my illiteracy!

 

[Steve]

Lmfao

Hush up Mike! Dont you have a 125 to finish?

 

[Steve]

Sent from my E6910 using Tapatalk

Thats a happy little dude right there!

 

[p61 western]

Hush up Mike! Dont you have a 125 to finish?

Yeah I suppose one of these days lol.

 

[redline4]

Nice CEL slacker!



How much boost can gorilla tape hold?



How was Monkeying around this weekend?

Yes.

28psi. My Dads truck..blew the charge air cooler duct apart. Pulling his 5th wheel. I had him glue it, triple hose clamp it and gorilla tape it to get him home.

Good! Spent more time talking chit than anything, but it was fun.
Got to watch @stihl livin barter with the amish too...

 

[cgraham1]

My nephew is pretty excited about his new saw.

 

[ktmtigger]

Thats a happy little dude right there!

Most times but very colicky lately. Can't get anything done while holding a screaming boy

Sent from my E6910 using Tapatalk

 

[Steve]

Most times but very colicky lately. Can't get anything done while holding a screaming boy

Sent from my E6910 using Tapatalk

Yep, i remember those days. Before long he'll be holding you while you dont feel well. They grow so fast.