Random pics (that you took) thread...

[Bigmac]

Got the deck built on the hay wagon today!

View attachment 186709 View attachment 186710 View attachment 186711

Dang, you need to rent that as a party dance floor!

 

[Steve]

Built a new toung for it aswell. The one on it was cobbled together from about 12 pieces of short stock, a box of 6011, and weighed about 75 lbs! Took it around the field and got the seal of approval. Will get sides on it here shortly.

 

[Steve]

Dang, you need to rent that as a party dance floor!

Its going to be my land yaght party barge!

 

[Bigmac]

Its going to be my land yaght party barge!

Heck ya!! Make some money! And they aren’t stake sides, it’s safety rail! Lol

 

[Wilhelm]

Then definitely the 041!

Stihl 041 wouldn't start, by the time I arrived with my PS-6100 in the cars trunk they cut the needed firewood with the blue saw.
Needless to say they didn't cut any spare wood.

This was the second time the same Stihl failed to work.

I told my coworker to throw the 041 in the lake a we were at and get a boat later.

 

[Bigmac]

Stihl 041 wouldn't start, by the time I arrived with my PS-6100 in the cars trunk they cut the needed firewood with the blue saw.
Needless to say they didn't cut any spare wood.

This was the second time the same Stihl failed to work.

I told my coworker to throw the 041 in the lake a we were at and get a boat later.

Dang, today was not my day for guessing! Glad I didn’t buy lottery tickets!! Need more luck....

 

[p61 western]

Its going to be my land yaght party barge!

It might need a pole...

 

[Bigmac]

It might need a pole...

Maybe two?

 

[p61 western]

Dang, today was not my day for guessing! Glad I didn’t buy lottery tickets!! Need more luck....View attachment 186737View attachment 186738 View attachment 186739View attachment 186740 View attachment 186741

Be careful it might be poison oak lmao.

 

[p61 western]

Maybe two?

More is always better lol.

 

[Steve]

It might need a pole...

Maybe two?

I knew i should have made it 14 foot long!

 

[cgraham1]

Been on the road for a little over an hour... and only 13 more to go.

If we don’t make any stops...

 

[PissRev]

Random images of my walk through the woods with my son.

 

[Marshy]

Built a new toung for it aswell. The one on it was cobbled together from about 12 pieces of short stock, a box of 6011, and weighed about 75 lbs! Took it around the field and got the seal of approval. Will get sides on it here shortly.

View attachment 186713 View attachment 186714 View attachment 186715

Did you use 4x6 for the two main beams to build the deck on? I just bought a set of John Deere running gear and plan to build a flat bed hay waggon. I believe it was a silage waggon before because it has extra steel guides for the unloader chains. They need to come off then I was going to build on it.

 

[Steve]

Did you use 4x6 for the two main beams to build the deck on? I just bought a set of John Deere running gear and plan to build a flat bed hay waggon. I believe it was a silage waggon before because it has extra steel guides for the unloader chains. They need to come off then I was going to build on it.

Yep 4x6x12 for the beams

4x4 for the joist

5/4 for the deck

6" construction lags countersunk to tie it all together.

Only bolt the beams to the rear axle and let them float on the front. Run a chain around the beams in the front with about 8" of allowable movement. That way the gear can flex without tearing the deck apart. The chain is to keep the deck from flipping off backwards.



All pressure treated so i dont have to store it inside or oil the wood.

 

[mdavlee]

Weld test #5 for this place. I have one more left to go next week.

 

[redline4]

Been on the road for a little over an hour... and only 13 more to go.

If we don’t make any stops...

View attachment 186767

We are heading back out to Glacier this August. 12 hours to Glendive Mt, then another 9 to where we are staying near Browning.

 

[Steve]

Weld test #5 for this place. I have one more left to go next week.

Flawless welds get me all wet! Nice!

 

[Ronaldo]

Weld test #5 for this place. I have one more left to go next week.

Fantastic looking welds.

Sent from my SM-S320VL using Tapatalk

 

[redline4]

Guess that CV shaft Monday edition.