redline4
I'm huge in Japan
- Local time
- 9:58 AM
- User ID
- 5593
- Joined
- Mar 12, 2018
- Messages
- 12,733
- Reaction score
- 107,368
- Location
- Rosholt Wisconsin

View attachment 159678
These are the alky numbers. The low number was with less timing, might need to do a programable cdi so I can pull timing after 10k rpm to help over-rev, 4 degrees killed peak power but the over-rev would be nice, may have to try different reeds and domes...for science! Lol was hoping for a little more peak hp on alky but I gained 7-10hp under the curve so I am happy with that, it also needs more fuel, I have to either drill the power jet to add more fuel/ or add a second power jet, may try a different needle, before resorting to drilling the emulsion tubes larger, they are already enlarged but once you go too big you can’t go back! Lol I am at .118 and could go .120, but “they” say .122 is the max! She ran hard for a couple test pulls, but one plug started to back out, detonating a hair, plug looked good, but on the edge, need more fuel, or pull timing in the top end, I am maxed out on fuel delivery without drilling larger! View attachment 159677
She pulled the current gearing with ease, going to try more gear more fuel and less timing
Thats cause you have much better little trucks over there!
Want me to send this down?
View attachment 159739
Its got a new crank, rods, pistons, bearings and chains...
Thats cause you have much better little trucks over there!
Boy if that not the understatement of the week lol.
Please Sir Tell me more , don’t know much about these trucks
This one is the Colorado 3.0D
Another view of the mighty 2.4
Mines almost ready to run. Just need to get the intake on it and a few small parts.
View attachment 159749
Its got the diesel, huh? I cant say I was impressed with power from them. They have been solid though. A few emissions issues. I dont care for the rest of the Colorado/Canyon though. They feel flimsy and cheap to me. But they are not cheap to buy.
There are drags and events to race, plus dune racing in Winchester bay, Florence and box car, I love dune racing the most, plus it it’s usually a longer run. I am a big guy, so it’s hard to get great times, (6’8” and 285lbs) but I would love to get a 4.0 in 100yards, usually race in real sand, not dirt tracks so it’s a little harderDo you have atv drag races where you are? Are you shooting for a specific run time or just trying to make sure no one can catch you?!![]()
I'll put it this you'll get laughed at in these parts with one of them.You sir outa spill some beans too ha ha
Wtf is the world coming too?
View attachment 159762
What kind of plant egg does that come from? And didnt some biologist prove plants have feelings too?
![]()