- Local time
- 10:16 PM
- User ID
- 2584
- Joined
- Feb 4, 2017
- Messages
- 7,058
- Reaction score
- 47,802
- Location
- Winona County, MN
Looking to sell my @Powerstroke Cowboy ported Dolmar 111. Saw is real zippy. Nothing wrong with it, I just hardly use it and have a large expense coming up.
David did an excellent job building this saw with a brand new OEM piston, and his porting just works. If I was a Dolmar guy, this would be hard to let go.
Saw is low use/low hour to begin with. Has a full size 3/8 .050 chain, set up on a 16” original Oregon bar. I used the saw a few times for some smaller tree felling, but I just don’t use it enough to justify keeping it.
Muffler has some staining, which has been there since I received the saw. I have only run the saw on non-oxy 91 octane mixed 32:1 with Dominator.
Looking to get $550 plus the ride. Or make a solid offer. Thanks!
David did an excellent job building this saw with a brand new OEM piston, and his porting just works. If I was a Dolmar guy, this would be hard to let go.
Saw is low use/low hour to begin with. Has a full size 3/8 .050 chain, set up on a 16” original Oregon bar. I used the saw a few times for some smaller tree felling, but I just don’t use it enough to justify keeping it.
Muffler has some staining, which has been there since I received the saw. I have only run the saw on non-oxy 91 octane mixed 32:1 with Dominator.
Looking to get $550 plus the ride. Or make a solid offer. Thanks!
Last edited:
