Oregon bar identification

[redoakneck]

Found this roller nose, not sprocket nose bar. Appears to be 24" long, .050 gauge.

Any ideas on what it fits. Has a bunch of holes for mounting.

Guess i should have had a picture of the tip and tail.

 

[Warped5]

Yep, that's an Oregon bar.

(Dang, I'm funny)

You can contact the fine folks at Oregon and they may be able to help you out. I've called them in the past about vintage items.

http://www.oregonproducts.com/pro/service/contact_us.htm

 

[67L36Driver]

The old 'universal' mount maybe. like this.

 

[redoakneck]

The old 'universal' mount maybe. like this.
View attachment 31429

Yep, that is the tail exactly!!

 

[Philbert]

The old 'universal' mount maybe. like this.

Is that a real bar, or a demonstration piece? Seems like it would hemmorage oil out of all the un-used holes!

Current tail profiles, attached.

Philbert

 

[redoakneck]

I just sent Oregon an email, hopefully they will tell it is a very rare bar and is worth millions!!!

 

[redoakneck]

The old 'universal' mount maybe. like this.
View attachment 31429

That is what mine looks like, I haven't attached it to a saw yet.

I think with the drivers moving forward hopefully will catch the oil before it can leak down??

 

[67L36Driver]

I've considered making a paper gasket patterned off the bar plates before. Put it on the off side of the bar.

 

[67L36Driver]

I just sent Oregon an email, hopefully they will tell it is a very rare bar and is worth millions!!!

Gee I hope it is as I have several.[emoji106]

 

[redoakneck]

I've considered making a paper gasket patterned off the bar plates before. Put it on the off side of the bar.

To keep the oil in proper location??

Heavy wax paper??

 

[Wagnerwerks]

I had a few of them that where branded wright.

 

[redoakneck]

Oregon emailed me back!!!

Bar is from 1965-1967.

Fits Remington, Mac, Clinton, Wards monark, Silver King, and Hoffco.

I'm going to see if it will work on a 372 Husky???

 

[redoakneck]

Uni-mount," Roll-o-Matic", roller nose. 25"
.050 gauge

It was made same time period as me!!

 

[Philbert]

Fits Remington, Mac, Clinton, Wards monark, Silver King, and Hoffco.

Still think that it looks like a practice assignment from a plasma cutting class!

Philbert

 

[Fish]

I remember that play dough used to have a toy that had different shapes like that.