farminkarman
I like the red & black ones
- Local time
- 4:08 PM
- User ID
- 13535
- Joined
- Aug 17, 2020
- Messages
- 4,834
- Reaction score
- 27,794
- Location
- Neenah Wisconsin
Just checking to see if anyone has an OEM coil for an MS361.
FOUND IT OEM coil for MS361
- Thread starter farminkarman
- Start date
Warped5
Pinnacle OPE Member
- Local time
- 4:08 PM
- User ID
- 432
- Joined
- Jan 7, 2016
- Messages
- 982
- Reaction score
- 2,751
- Location
- Northwest IN
Just my $.02 here ....
Some of the early 361s were known to have a wonky coil here and there. I've had great success (and saved some $$) by using coils from Huztl on eBay.
Another note on aftermarket coils: Many OEM coils will only fire if the flywheel RPM reaches a certain minimum speed. It seems that some of the aftermarket ones do not have this requirement. I had a Shindaiwa 488 that would start on a 6" rope pull.
Some of the early 361s were known to have a wonky coil here and there. I've had great success (and saved some $$) by using coils from Huztl on eBay.
Another note on aftermarket coils: Many OEM coils will only fire if the flywheel RPM reaches a certain minimum speed. It seems that some of the aftermarket ones do not have this requirement. I had a Shindaiwa 488 that would start on a 6" rope pull.
- Local time
- 4:08 PM
- User ID
- 4
- Joined
- Dec 3, 2015
- Messages
- 52,953
- Reaction score
- 352,656
- Location
- Banner Springs Tennessee
If you don't find a used one let me know. I can get you a new one at dealer cost.
farminkarman
I like the red & black ones
- Local time
- 4:08 PM
- User ID
- 13535
- Joined
- Aug 17, 2020
- Messages
- 4,834
- Reaction score
- 27,794
- Location
- Neenah Wisconsin
Thanks Randy! I figure I will give this a few days. I am tired of the AM coils lasting for about 5 tanks of gas. If I don’t find a used one, I will reach out.
farminkarman
I like the red & black ones
- Local time
- 4:08 PM
- User ID
- 13535
- Joined
- Aug 17, 2020
- Messages
- 4,834
- Reaction score
- 27,794
- Location
- Neenah Wisconsin
The saw I am having trouble with is a 361 clone that I built with my boys for Christmas last year. The saw runs awesome with a ported OEM top end and a Tilly carb. Only problem is that it has cooked the original kit coil and a second one now in about 10 tanks of runtime. Maybe AM is fine, but my experience hasn’t been good so far.
- Local time
- 4:08 PM
- User ID
- 4
- Joined
- Dec 3, 2015
- Messages
- 52,953
- Reaction score
- 352,656
- Location
- Banner Springs Tennessee
I believe the 361 coil is the worst aftermarket coil. Bar none.
