not so pros

[Czed]

Lean it over to 55, swing the vice to 25, and tilt the vice 10° each way for l or r cutters. Stop the down travel when the cutter point just comes to the side of the wheel. It'll cut almost as fast as square

55°25°10° I'll try that combo
It'll be here on the 5th
It was only 80.00 shipped
I ordered extra wheels
If it saves time fixing chain's
it'll be worth it.
Might get one to setup just for rakers.
Firewood seasons here
Always have chain's to sharpen for guy's.

 

[Canadian farm boy]

55°25°10° I'll try that combo
It'll be here on the 5th
It was only 80.00 shipped
I ordered extra wheels
If it saves time fixing chain's
it'll be worth it.
Might get one to setup just for rakers.
Firewood seasons here
Always have chain's to sharpen for guy's.

Biggest thing I can suggest is to try and get the chain centered in the vice.
My round grinder is set up for .050 chain. If I sharpen .063 on the grinder the chain will cut crescents.

 

[Jon1212]

It's now after 5:00 PM on the East coast....and nary a word from the Swedes.

[Silver lining]
I did get a call from my wife that she had to take our very pregnant daughter to the hospital. Grandbaby number three may be arriving soon.

 

[Lightning Performance]

Biggest thing I can suggest is to try and get the chain centered in the vice.
My round grinder is set up for .050 chain. If I sharpen .063 on the grinder the chain will cut crescents.

On my B&F 399 round grinder I do all one side and then set up to do the other. 375 RM type first RS second. Not much adjustment built in to it.
Never tried 404 on it.
Going to try ten and five degrees for the 404 chipper mill chain.

 

[Lightning Performance]

It's now after 5:00 PM on the East coast....and nary a word from the Swedes.

[Silver lining]
I did get a call from my wife that she had to take our very pregnant daughter to the hospital. Grandbaby number three may be arriving soon.

Congrats!

 

[Stump Shot]

It's now after 5:00 PM on the East coast....and nary a word from the Swedes.

[Silver lining]
I did get a call from my wife that she had to take our very pregnant daughter to the hospital. Grandbaby number three may be arriving soon.

Congratulations Pawpaw.

 

[beaglebriar]

Ugh! This waiting game is terrible. I've been awake since 3:15 a.m.......<sigh>

Did they say they would call today?

 

[Czed]

Biggest thing I can suggest is to try and get the chain centered in the vice.
My round grinder is set up for .050 chain. If I sharpen .063 on the grinder the chain will cut crescents.

All my 3/8 is .50
I've got the 261 with the bastard .63

 

[USMC615]

Evening folks!

 

[Jon1212]

Did they say they would call today?

They said, Monday or possibly Tuesday.

 

[beaglebriar]

They said, Monday or possibly Tuesday.

Well then relax man!... Mondays are always a clusterfuk.

 

[beaglebriar]

This will cheer you up.

 

[Jon1212]

This will cheer you up.

LOL!

 

[Dub11]

It's now after 5:00 PM on the East coast....and nary a word from the Swedes.

[Silver lining]
I did get a call from my wife that she had to take our very pregnant daughter to the hospital. Grandbaby number three may be arriving soon.

Congratulations!

 

[p61 western]

Good evening fellas.

 

[p61 western]

It's now after 5:00 PM on the East coast....and nary a word from the Swedes.

[Silver lining]
I did get a call from my wife that she had to take our very pregnant daughter to the hospital. Grandbaby number three may be arriving soon.

Good evening and congratulations Jon.

 

[Dub11]

Boy talk about some irony
https://www.ksnt.com/news/local-new...a-high-school-after-tornado-damage/1399447737

( Sent from KSNT News )

 

[Time's Standing Stihl]

Happy Friday to me. 45 mo minutes

 

[Stump Shot]

This will cheer you up.

WTF?

 

[beaglebriar]

WTF?

My buddies 290....his maintenance schedule is lacking a little. Pretty sure the saw performed it's own muffler mod.