- Local time
- 1:25 PM
- User ID
- 377
- Joined
- Jan 1, 2016
- Messages
- 19,441
- Reaction score
- 111,638
- Location
- Warren Center, PA

The UPS guy is scared to death of ol' Gus.
I was hoping there was a place to buy good one's I've exhausted my supply lolThe best looking ones in my box of crappy circlips, sometimes just the crappy circlips themselves. As long as they go in and lock with no wiggle jiggle, they stay in pretty good.(most/some times)
I has question on the am pistons with the crappy circlips what have you guys been using oem circlips are too big sometimes.
After that he would lay on the horn until i went to his truck lolThe UPS guy is scared to death of ol' Gus.
Most guys want the one ring those are good pistons.Basket case deal 372.
Jug is good but piston is not.
I have a meteor single ring but oem is 2 ring. Does the extra ring do enuff to go oem???
Here's what I need @stumpshot.
![]()
![]()
![]()
![]()
![]()
Sent from Hoskvarna Hills
Basket case deal 372.
Jug is good but piston is not.
I have a meteor single ring but oem is 2 ring. Does the extra ring do enuff to go oem???
Here's what I need @stumpshot.
![]()
![]()
![]()
![]()
![]()
Sent from Hoskvarna Hills
No the single ring meteor are a very good piston. The 371's were single ring.Basket case deal 372.
Jug is good but piston is not.
I have a meteor single ring but oem is 2 ring. Does the extra ring do enuff to go oem???
Here's what I need @stumpshot.
![]()
![]()
![]()
![]()
![]()
Sent from Hoskvarna Hills
Most guys want the one ring those are good pistons.
I built a mahle 371 single ring saw i didn't touch it ran so good i'd like to have it back.One rings go a little faster, less friction that way.
My 371/372 has the meteor piston along with some of my handy dandy port work. I'm pretty sure it'll out cut this stock 390 I just built. With a 20" bar anyway.I built a mahle 371 single ring saw i didn't touch it ran so good i'd like to have it back.
You do amazing work. If I ever strike it rich I'll have you build me a cabin.
The classic...PBR. We used to huff those bad boys down back in the late 70's, along with Schlitz Malt Liquor Bulls, Old Milwaukee (nastiest chit on the planet), and little Pony Millers. All we could afford, lol. If we saved up enough jingle, we could go top shelf...a fifth of Old Crow. Ha!!!Yup.....didnt even make into the house..
![]()
The classic...PBR. We used to huff those bad boys down back in the late 70's, along with Schlitz Malt Liquor Bulls, Old Milwaukee (nastiest chit on the planet), and little Pony Millers. All we could afford, lol. If we saved up enough jingle, we could go top shelf...a fifth of Old Crow. Ha!!!
You're welcomeThanks Dave.
I have a 661 running a single ring, only lost about 5 psi.Basket case deal 372.
Jug is good but piston is not.
I have a meteor single ring but oem is 2 ring. Does the extra ring do enuff to go oem???
Here's what I need @stumpshot.
![]()
![]()
![]()
![]()
![]()
Sent from Hoskvarna Hills
Wayne, I dont recall which thread I told you to increase the pop off in the carb but you can drop the lever a tad to increase it.My neighbor haf one of his friends stop by in a Nova and when he left tried to liteem up. Pretty sure my Sennia would smoke it.