not so pros

[T.Roller]

288 isn't m5[emoji12]

Then what studs are on here?

 

[mdavlee]

Ok thought it was.

They're much bigger like the 395. 440/460/064/372/390 are all M5.

 

[mdavlee]

Then what studs are on here?

M6 If I'm remembering right

 

[T.Roller]

Looks like 1/4 inch now that I'm looking at it lol

 

[hoskvarna]

If you need better pics and measurements pm me and I'll get them later.

Those pics are good nuff for me.

You learn stuff just by watching the pics and dialogue. If you don't have a clue what you guys are talking about then you can't learn and understand. [emoji15]


Sent from Hoskvarna Hills

 

[Time's Standing Stihl]

Afternoon fellers

 

[Mastermind]

It's a weird thread. Like a course M6

 

[Czed]

Afternoon dave and dave how's you

doing good damn hot lol
New type of build for me running walls for my friends new house.
The panels are in a section 7ft long about 300 pounds.
The panels are cut for an overlap of three inches over the deck and on top they are cut to lay horizontal and lock in.
They freestand until we put the channels inside and out over the seems.
After this normal 2x4 construction still need to cut the openings for doors and windows.
Next weekend the roof 3/4 plywood then a metal roof.
It will look like this after our friend mills lumber for barn style siding and floors.

 

[Czed]

doing good damn hot lol
New type of build for me running walls for my friends new house.
The panels are in a section 7ft long about 300 pounds.
The panels are cut for an overlap of three inches over the deck and on top they are cut to lay horizontal and lock in.
They freestand until we put the channels inside and out over the seems.
After this normal 2x4 construction still need to cut the openings for doors and windows.
Next weekend the roof 3/4 plywood then a metal roof.
It will look like this after our friend mills lumber for barn style siding and floors.View attachment 82931 View attachment 82932 View attachment 82933 View attachment 82934 View attachment 82935

 

[Termitebuffet]

M6 If I'm remembering right

I'm thinking it's Sae thread , it takes a 3/16 Allen for the socket head cap screws

 

[p61 western]

I'm thinking it's Sae thread , it takes a 3/16 Allen for the socket head cap screws

Good afternoon Randy, how are you doing?

 

[p61 western]

doing good damn hot lol
New type of build for me running walls for my friends new house.
The panels are in a section 7ft long about 300 pounds.
The panels are cut for an overlap of three inches over the deck and on top they are cut to lay horizontal and lock in.
They freestand until we put the channels inside and out over the seems.
After this normal 2x4 construction still need to cut the openings for doors and windows.
Next weekend the roof 3/4 plywood then a metal roof.
It will look like this after our friend mills lumber for barn style siding and floors.View attachment 82931 View attachment 82932 View attachment 82933 View attachment 82934 View attachment 82935

That's interesting, what are the panels made out of Dave?

 

[mdavlee]

It may be 1/4-20

 

[Termitebuffet]

Good afternoon Randy, how are you doing?

I'm ok

 

[hoskvarna]

I'm ok

Afternoon Mr Termitebuffet


Sent from Hoskvarna Hills

 

[Czed]

That's interesting, what are the panels made out of Dave?

Lifetime warranty Galvanized with fireproof foam 2 inches thick.
Bug proof weather proof water proof lol
My brother has a building 14×20 with the same panels you can heat it with a lightbulb in the winter.
22×68 Normally i think.
These were precut from the same place just for this build.
Each panel is around 25.00 and weighs 35 pounds.
We are building less than half the house now 32×24 eventually it will be 52×68 with a wrap around 10ft porch and the back of the house built.

 

[dall]

Afternoon monkeys

 

[Stihlsmoking]

Afternoon monkeys

Afternoon Dallas. Get that 461 done yet ?

 

[dall]

Afternoon Jeremy and nope being lazy today how's you

 

[Sty57]

I ran over to a little Military show about 5 miles from the house this morning.