not so pros

[p61 western]

I'm good. Bout to go kill that chain I got from you. Gals across the road need firewood cut and I've been slacking on it

Good morning Kevin, what saw are ya going to use?

 

[dall]

morning wayne hows you

 

[Czed]

@USMC615 i just spent 2 minutes calling in my unemployment you may need to start working sundays soon

Not you of course two brothers i know now have permanent disability.
One from a spider bite which he did get bit but recovered .
One said he fell working for the schoolboard.
They have been on this for year's
I have no idea how they got it must've paid someone off
Nothing wrong with them mow grass work on crap all the time.
Another guy said he had difficulty dealing with people he also has perm disability.
I know several tore up vet's and loggers that had to fight to get any help at all some haven't .
Just a rant sorry.

 

[Czed]

@USMC615 i just spent 2 minutes calling in my unemployment you may need to start working sundays soon

I know several union guy's getting ready for a big job in pa.
Nothing going on around here.
Supposed to last years.

 

[p61 western]

Not you of course two brothers i know now have permanent disability.
One from a spider bite which he did get bit but recovered .
One said he fell working for the schoolboard.
They have been on this for year's
I have no idea how they got it must've paid someone off
Nothing wrong with them mow grass work on crap all the time.
Another guy said he had difficulty dealing with people he also has perm disability.
I know several tore up vet's and loggers that had to fight to get any help at all some haven't .
Just a rant sorry.

Good morning Dave, what are you up to today?

 

[dall]

Not you of course two brothers i know now have permanent disability.
One from a spider bite which he did get bit but recovered .
One said he fell working for the schoolboard.
They have been on this for year's
I have no idea how they got it must've paid someone off
Nothing wrong with them mow grass work on crap all the time.
Another guy said he had difficulty dealing with people he also has perm disability.
I know several tore up vet's and loggers that had to fight to get any help at all some haven't .
Just a rant sorry.

one of my moms neighbors is on disability because of his back but yet he does mechanic and carpentry he also was working at sheriffs department to deliver papers and screen people going through metal detector at the court house
he now has a wrongful firing suit against the new sheriff lol hes a sue happy pucker i thought once about buying some hogs and pen them up right across the road from his house

 

[Genius]

I'm going to be getting a welder for my shop here shortly.

I've come down to a Miller 211
Lincoln 210
Or a ESAB Rebel 215

These welders come as Mig only or multipurpose option for a few hundred more so I can Tig

Is 210 amps enough to tig, or should I just get the cheaper mig only welder and spend that money on a tank?

Do any of you guys have a preference on these smaller welders in regards to Miller, Lincoln or ESAB? I'm leaning towards Miller because that's all I've ever used, but I'm used to their bigger stuff

 

[Dub11]

Mornin'
We got bored and went to the movies last night missed dunkirk already playing.
But valerian and then watched that spiderboy movie they were pretty good.

I would of been asleep before the commercials were over

No Wonder Woman?

There was no fapping allowed Steve

Good morning to the band of rejects

I resemble that remark

I highly recommend checking this place out.

Yea, no pets allowed, I did kinda chuckle at it.
We went to the Creation Museum first before the Ark. No pets allowed there either. But they did have a guy come in so did a snake show. Eli loves snakes so he talked us into going to it.

We got there early and Eli Sat in the front row. He got talking with the guy doing the show and he told the guy that I'm scared of snakes and I hate them.....

Guess who the guy doing the show grabbed out of the audience to help him....

View attachment 79551

Oh hell to the no

Yea, I really wanted to cut that damn things head off.

This is a Christian based museum, this show had a lot of kids in it. That snake slithered it's head up to my head and put it's toung in my ear.

I had to make a public apology. I believe my exact words were "*f-word this, get this *frenching thing of of me "

Right on there and in my apology I would of reminding them snakes are evil

lol i grew up in my uncles junkyard grew up playing with snakes and snapping turtles i have played with copperheads just make sure you hold them right

also if you want to kill one you grab it by the tail and bull whip it its pretty cool too

Yes it is

morning wayne hows you

Meh I made it home I guess there was a storm. So I gots to run a saw and saw stuff.

 

[dall]

I know several union guy's getting ready for a big job in pa.
Nothing going on around here.
Supposed to last years.

we have a couple small gas fired plants in the works but waiting on permits and legal stuff to go through also mike lee said he knows where a couple jobs in md and pa new work

ill stay around here and work the outage this fall is a header replacement job and will be a good one

 

[Dub11]

I'm going to be getting a welder for my shop here shortly.

I've come down to a Miller 211
Lincoln 210
Or a ESAB Rebel 215

These welders come as Mig only or multipurpose option for a few hundred more so I can Tig

Is 210 amps enough to tig, or should I just get the cheaper mig only welder and spend that money on a tank?

Do any of you guys have a preference on these smaller welders in regards to Miller, Lincoln or ESAB? I'm leaning towards Miller because that's all I've ever used, but I'm used to their bigger stuff

Hobart is yesterdays Miller. So you could save some doll hairs there.

 

[dall]

I'm going to be getting a welder for my shop here shortly.

I've come down to a Miller 211
Lincoln 210
Or a ESAB Rebel 215

These welders come as Mig only or multipurpose option for a few hundred more so I can Tig

Is 210 amps enough to tig, or should I just get the cheaper mig only welder and spend that money on a tank?

Do any of you guys have a preference on these smaller welders in regards to Miller, Lincoln or ESAB? I'm leaning towards Miller because that's all I've ever used, but I'm used to their bigger stuff

mig and tig both use gas if it was me id buy a all in one mig tig and stick i have 3 welders in my building that take up way to much room

 

[Czed]

Good morning Dave, what are you up to today?

good not much working around the house.

 

[Dub11]

mig and tig both use gas if it was me id buy a all in one mig tig and stick i have 3 welders in my building that take up way to much room

What would you recommend?

 

[dall]

What would you recommend?

@mdavlee knows more about them

 

[mdavlee]

I'm going to be getting a welder for my shop here shortly.

I've come down to a Miller 211
Lincoln 210
Or a ESAB Rebel 215

These welders come as Mig only or multipurpose option for a few hundred more so I can Tig

Is 210 amps enough to tig, or should I just get the cheaper mig only welder and spend that money on a tank?

Do any of you guys have a preference on these smaller welders in regards to Miller, Lincoln or ESAB? I'm leaning towards Miller because that's all I've ever used, but I'm used to their bigger stuff

My neighbor has the Lincoln 3 in 1. Works good for home/hobby work.

 

[dall]

morning mike hows you

 

[Genius]

Hobart is yesterdays Miller. So you could save some doll hairs there.

The one thing I don't like about Hobart is that you can't fine tune the things. They have 10 or so voltage settings. I like to have the ability to fine tune my voltage.

mig and tig both use gas if it was me id buy a all in one mig tig and stick i have 3 welders in my building that take up way to much room

I've got a old Lincoln tombstone for stick already. I'm questioning if these smaller ones will have enough ass behind them for tig.

If I do go with the more expensive multi-task ones I will have to use flux-core wire for the time being until I can get a tank.

Also if I get a multi-task I'm not planning on setting up for tig, but at least I have that option down the road if the need arises

 

[hoskvarna]

I'm going to be getting a welder for my shop here shortly.

I've come down to a Miller 211
Lincoln 210
Or a ESAB Rebel 215

These welders come as Mig only or multipurpose option for a few hundred more so I can Tig

Is 210 amps enough to tig, or should I just get the cheaper mig only welder and spend that money on a tank?

Do any of you guys have a preference on these smaller welders in regards to Miller, Lincoln or ESAB? I'm leaning towards Miller because that's all I've ever used, but I'm used to their bigger stuff

Been welding for 20yrs as my profession.
Have used the Miller and Lincoln good ones. Have not used Esab. We tested one where I used to work, bigger one, I didn't like it.
For me it would come down to the first two $ and dealer support and how close dealer.


Sent from Hoskvarna Hills

 

[mdavlee]

Get gas to use the dual shield wire. Much better welds. The Lincoln if I remember right will run a push/pull fun to mig aluminum

 

[Dub11]

The one thing I don't like about Hobart is that you can't fine tune the things. They have 10 or so voltage settings. I like to have the ability to fine tune my voltage.



I've got a old Lincoln tombstone for stick already. I'm questioning if these smaller ones will have enough ass behind them for tig.

If I do go with the more expensive multi-task ones I will have to use flux-core wire for the time being until I can get a tank.

Also if I get a multi-task I'm not planning on setting up for tig, but at least I have that option down the road if the need arises

Yeah my Hobart 140 a has 4 settings lol. Its good for basic and I mean basic stuff. Anyways I spend more time unsticking the gun from the splatter I just laid down lol