Not So Pro 3

[Mastermind]

044 jug, exhaust side, I've sanded and hit with scotch Brite. I can barely feel it with my finger nail. It's my truck saw project, finally getting to work on it. Is it OK to use?

Run it. Just be sure to sand the bevels around the port edges well with the tip of your finger. Use 220 grit for that, then use scotchbrite again. That transfer gets stuck on the edge, and marks up the piston if not removed.

 

[Boomhower]

View attachment 445256
I guess driving a Chevy automatically entitles you to the handicapped parking. Some people must need a reminder that mentally doesn't count.

Easier to push inside the shop.

 

[greystone mountain man]

I don't advocate damaging someone else's property, even if they are an asshat. Besides, he bought a bright yellow camaro, so is probably a little retarded.

Bet they have a garage full of stihls too

 

[Mastermind]

Ordered a coil. It’s been acting funny for a while.

Check the wiring harness real good.

 

[dall]

Don’t wanna get your kitty wet?

lol gfy

Easier to push inside the shop.

youd know about pushing ford owner

 

[dall]

Bet they have a garage full of stihls too

was it you ?

 

[Loony661]

Go back to huggin yer creamsicle bish!

I think I hugged it too hard today.

 

[Tor R]

i havent been swimming in over 10 years

Trust me, you are in the safest hands with me on the other end of the rope!

 

[dall]

Trust me, you are in the safest hands with me on the other end of the rope!

only if i had a husky in my hands

 

[Boomhower]

lol gfy

youd know about pushing ford owner

Id rather walk and tote a Ford hub cap then drive one of them śhit box chevys of yours.

 

[Tor R]

View attachment 445281View attachment 445282

I think I hugged it too hard today.

I've seen on Youtube that the Stihl guys cut off the end of the top cover and install an air filter that reaches just to the end of the chainsaw.
I'd say you're off to a good start now.

 

[dall]

Id rather walk and tote a Ford hub cap then drive one of them śhit box chevys of yours.

you do need the exercise

 

[Boomhower]

you do need the exercise

i got nothing…

 

[Mastermind]

View attachment 445281View attachment 445282

I think I hugged it too hard today.

You loggers are hard on equipment.

 

[Lnk]

you do need the exercise

Well, he does drive a ford, so doesn't get to walk as much as you chebby guys.

 

[cuinrearview]

Check the wiring harness real good.

Well he is a hell of a mechanic

 

[Tor R]

only if i had a husky in my hands

The only problem I can see is that you're holding onto the Husky with both hands, and forgetting to hold on to the rope tightly, when I pull you to shore.

 

[greystone mountain man]

no pros here they are still discussing intelligent carbs and jet sizes in snow mobiles

Don't forget mixing oil

 

[beaglebriar]

Check the wiring harness real good.

I found a bare spot on the blue lead from the coil. Taped it up,made no difference. I will look it over more closely tomorrow. Thanks

 

[dall]

Well, he does drive a ford, so doesn't get to walk as much as you chebby guys.

lol you could use exercise too slacker