Not So Pro 3

[Mastermind]

dildos rollin coal

Dallas !?!?!

 

[dall]

Yer dun poastin’ in hear

b low me

Not in the biblical sense.

so personally ?

Dallas !?!?!

lol i dont go to grocery store and the smoke isnt that bad

 

[dall]

Dallas !?!?!

its fun to watch the little rice *b-word rockets try to outrun the truck redlight to redlight even if trailer behind

 

[JugHead27]

its fun to watch the little rice *b-word rockets try to outrun the truck redlight to redlight even if trailer behind

The chit racers bro!

 

[sawmikaze]

I earned my money today girls, another set of white pines. - fukk me running.

 

[cus_deluxe]

 

[cus_deluxe]

I earned my money today girls, another set of white pines. - fukk me running.

View attachment 384236

id rather deal with white pine than spruce.

 

[JugHead27]

id rather deal with white pine than spruce.

Hawthorn is my favourite to cut

 

[redline4]

Guess who gets to be the first one to dig into the new dual clutch transmission in the new Corvette?


They really close off the under side for drag reduction.


The main valve body, seals and gaskets and 1 time use bolts come out to $4400 in parts alone. I didn't even look to see what the general will pay me to do it. Probably something dumb like 1.4 hours.

 

[cus_deluxe]

Hawthorn is my favourite to cut

almost as good as honey locust. thank gourd we dont have those up here.

 

[Firewood Hoarder]

Guess who gets to be the first one to dig into the new dual clutch transmission in the new Corvette?
View attachment 384238

They really close off the under side for drag reduction.
View attachment 384239

The main valve body, seals and gaskets and 1 time use bolts come out to $4400 in parts alone. I didn't even look to see what the general will pay me to do it. Probably something dumb like 1.4 hours.

None of that looks like fun. Probably 60 fasteners there just in removing the underbody panels

 

[dall]

Guess who gets to be the first one to dig into the new dual clutch transmission in the new Corvette?
View attachment 384238

They really close off the under side for drag reduction.
View attachment 384239

The main valve body, seals and gaskets and 1 time use bolts come out to $4400 in parts alone. I didn't even look to see what the general will pay me to do it. Probably something dumb like 1.4 hours.

done yet

 

[Mastermind]

Guess who gets to be the first one to dig into the new dual clutch transmission in the new Corvette?
View attachment 384238

They really close off the under side for drag reduction.
View attachment 384239

The main valve body, seals and gaskets and 1 time use bolts come out to $4400 in parts alone. I didn't even look to see what the general will pay me to do it. Probably something dumb like 1.4 hours.

I figured the lord of the wrench would be on that one.

 

[dall]

I figured the lord of the wrench would be on that one.

you need to stay out of the sun light

 

[redline4]

done yet

No clue when I'll even have the parts. Did the diagnosis on it today.

I figured the lord of the wrench would be on that one.

His bìtch ass had ample opportunity to work on it as it's been at the shop since 8am Monday morning.
The polesmoker service manager danced around the repair order laying on the counter while spoon feeding his baby boy and dreaming of felching Pabst blue ribbon from lord of the wrenches asshòle and waited until I was caught up to give it to me.
Whatever. I'll do the job. And unlike those fùckwads reinstall all the bolts.
I guarantee I'll get 75% of the way into the job and the old Lord will come walking over, because he's a nosey piece of shìt, and ask what I'm doing. He will then immediately turn into a subject matter expert and I will tell him to go fornicate with himself and a pair of jagged vice grips.
Happens all the time.

 

[dall]

No clue when I'll even have the parts. Did the diagnosis on it today.


His bìtch ass had ample opportunity to work on it as it's been at the shop since 8am Monday morning.
The polesmoker service manager danced around the repair order laying on the counter while spoon feeding his baby boy and dreaming of felching Pabst blue ribbon from lord of the wrenches asshòle and waited until I was caught up to give it to me.
Whatever. I'll do the job. And unlike those fùckwads reinstall all the bolts.
I guarantee I'll get 75% of the way into the job and the old Lord will come walking over, because he's a nosey piece of shìt, and ask what I'm doing. He will then immediately turn into a subject matter expert and I will tell him to go fornicate with himself and a pair of jagged vice grips.
Happens all the time.

pictures of vice grips

 

[redline4]

pictures of vice grips

I'm pretty sure Google images can satisfy all of your desires.

 

[dall]

I'm pretty sure Google images can satisfy all of your desires.

lol not all

 

[Firewood Hoarder]

lol not all

Turn safesearch off

 

[Mastermind]

pictures of vice grips

I was gonna ask that !!!!