Not So Pro 3

[Lnk]

Aight…I’ll get back with ya shortly. Gots to finish up bagging some mo damn leaves. *s-wordt be growing around here, and it’ll be mower time soon enough.

What season are you in there Jason? My leaves all fell by the end of November, did they move Georgia to the southern hemisphere? Lol

 

[full chizel]

Changed a shear pin on the Ariens and the moved some snow for the runout…

https://youtube.com/shorts/x02aun9Zzk4?feature=share

https://youtube.com/shorts/bD_zvzqWK24?feature=share

Nice job on the hill Gary. +1 for no concussions.

 

[full chizel]

Well…the wheels are on, the cylinder locks are on, worthless Weber temp gauge on top replaced with Midwest Hearth 3” dial/2.5” stem thermometer (Tel-Tru rebranded for Midwest Hearth) Next up since it came today while I was at work…Cajun Bandit SS door/latch and SS lid hinge. Pretty simple…

View attachment 328653

Is that pump next to the Dewalt box how you jump start the blueys?

 

[Dream]

Changed a shear pin on the Ariens and the moved some snow for the runout…

https://youtube.com/shorts/x02aun9Zzk4?feature=share

https://youtube.com/shorts/bD_zvzqWK24?feature=share

That was MUCH better than the last one you posted.
Subscribed.

 

[shadco]

Been busy



Doing nothing.

.

 

[Dream]

I fixed my dilemma of trying to carry a saw and still use the bucket.
Couple random chunks of wood and some screws.
I want to get a couple small eyeballs to screw in at the top so I can bungee it in, for the times I'm go full send in the Bobcat.
View attachment 328637 View attachment 328638

I aint tryin to tell ya howta run your skid steer bub, but watch backing up, especially when the buckets down back dragging. Pushes the arse end lower.
I smooshed up the tailgate on my other 95 Ferd pretty good by misjudging once. Luckily, it was down, so the rest of the bed didnt get smooshed.
I probably pushed the whole truck 2 or 3 feet before I noticed.
Little Gehl track loader gives no fuggs.

 

[Dream]

That'll be why there's a mannequin in my deconstruction site then.
View attachment 328650

Aint even asking what youre doing with/(to?) that Adam.

 

[USMC615]

Is that pump next to the Dewalt box how you jump start the blueys?

Lmao…

 

[USMC615]

Is that pump next to the Dewalt box how you jump start the blueys?

And don’t tell me how to run my pumps…Bub!

 

[Dream]

Aight…I’ll get back with ya shortly. Gots to finish up bagging some mo damn leaves. *s-wordt be growing around here, and it’ll be mower time soon enough.

Thats some slacker chit right there.
Leaves need to be cleaned up and that fuggin yard squared away in the FALL soldier!
This is NOT fall, BTW...

 

[timg]

Well…the wheels are on, the cylinder locks are on, worthless Weber temp gauge on top replaced with Midwest Hearth 3” dial/2.5” stem thermometer (Tel-Tru rebranded for Midwest Hearth) Next up since it came today while I was at work…Cajun Bandit SS door/latch and SS lid hinge. Pretty simple…

View attachment 328653[/QUO

Hey Jason, I missed pics after all the cowboy hype last weekend on the chuck roasts.
Could we get some pics of your final cook this time??
I don't want to say post some pics of your m____t. Yes just wouldn't be right.
BTW Like them mods on the Cowboy Cooker. SS rocks!

 

[redline4]

I aint tryin to tell ya howta run your skid steer bub, but watch backing up, especially when the buckets down back dragging. Pushes the arse end lower.
I smooshed up the tailgate on my other 95 Ferd pretty good by misjudging once. Luckily, it was down, so the rest of the bed didnt get smooshed.
I probably pushed the whole truck 2 or 3 feet before I noticed.
Little Gehl track loader gives no fuggs.

I figure it will only be a problem if I tried a bar over 24" on there.
Yeah, I've scraped the bottom of the engine door, but a guys getting pretty crazy with the cheese whiz to do such a maneuver.
There's quite a bit of clearance on this machine.
Dallas told me to only put the hooskies in there, just for safety and stuff.

 

[USMC615]

Thats some slacker chit right there.
Leaves need to be cleaned up and that fuggin yard squared away in the FALL soldier!
This is NOT fall, BTW...

It’s dem got dam red tips…them mf’rs drop like a damn Magnolia, with the exception of about two months a year. I’m gonna cut them *b-wordhes down, what’s gonna end up happenin’.

 

[redline4]

It’s dem got dam red tips…them mf’rs drop like a damn Magnolia, with the exception of about two months a year. I’m gonna cut them *b-wordhes down, what’s gonna end up happenin’.

Yeah, but that would require you start a chainsaw.
Then it would get dirty.
Then you'd spend the next 3 weeks polishing the mofo.

 

[USMC615]

Yeah, but that would require you start a chainsaw.
Then it would get dirty.
Then you'd spend the next 3 weeks polishing the mofo.

…and yer point?

 

[hoskvarna]

Little more ash cleanup today

Sent from Hoskey hilltop

 

[redline4]

…and yer point?

Who's going to feed the worms while your polishing the saw?

 

[hoskvarna]

More pics

Sent from Hoskey hilltop

 

[USMC615]

Who's going to feed the worms while your polishing the saw?

Valid…game changer. This has gots me thinkin’and I wuzn’t thinkin about thinkin tonight. Damn you…I hope yer two spruce studs you cut on the outside of the chainsaw quiver rot by tomorrow morning. That’ll teach ya.

 

[Dream]

More pics

Sent from Hoskey hilltop

Nice ash...