Not So Pro 3

[41FanForLife]

Just figured out the cabinet shop measured wrong. 18" is supposed to finished depth of corridor cabinets. Some asshat made them 1'-8" deep. Just another Monday morning here.

 

[Lnk]

Just figured out the cabinet shop measured wrong. 18" is supposed to finished depth of corridor cabinets. Some asshat made them 1'-8" deep. Just another Monday morning here.

But are they square?

 

[Woodrow]

Good morning fellas.

 

[redline4]

How many hours to perform this abortion Ed?

Book time is 40, warranty time 19.8.
I'm not sure where I'm at right now, I'd have to add up my punch times as we have to punch in and out of warranty jobs.

 

[redline4]

Morning guys and metric snake slashers.

 

[GCJenks204]

Morning / Evening All. Bit of a warm up going on, might hit the melting point today.



Wordle in 4 but oh so frustrating… 3 greens on first guess and then …
Wordle 234 4/6

 

[czar800]

Good morning fellas.

 

[Cat 525]

Have us in red flag warnings here for today!

 

[Mastermind]

Good morning men.

 

[dall]

Try 3”x 4”x 5” = 90°

lol 6,8,10 but most usually used on horizontal planes
Not on vertical planes where a level is more convenient

 

[dall]

Damn slackers

 

[redline4]

lol 6,8,10 but most usually used on horizontal planes
Not on vertical planes where a level is more convenient

Planes have to go slightly vertical before they can go horizontal, otherwise they'd hit the trees.
Duh.

 

[Dream]

Good morning hand humpers.
Getting a little bored wif all this square/plumb/level biz.

Lets argue over rotational alignment of shafts for a few.
I'll go first.
Make sure your shaft is properly aligned before attempting to GFY, or there may be bore damage.

 

[full chizel]

Wordle 234 4/6

 

[redline4]

How much clamp force is required to hold a transmission cooler line together?
Asking for GM...

 

[redline4]

Let's say a person has a male chicken.
Let's say his neighbor has a female turkey.
Is that how the cockgobbler came to be?

 

[dall]

Good morning hand humpers.
Getting a little bored wif all this square/plumb/level biz.

Lets argue over rotational alignment of shafts for a few.
I'll go first.
Make sure your shaft is properly aligned before attempting to GFY, or there may be bore damage.

hopefully your bore has healed lol

 

[shadco]

HBD Kev.

.

 

[Stump Shot]

Let's say a person has a male chicken.
Let's say his neighbor has a female turkey.
Is that how the cockgobbler came to be?

Ask Dallas if his folks ever told him. Lol

 

[Stump Shot]

Good morning.