Not So Pro 3

[Czed]

Paul calls me but he keeps the phone
Away from his face when he talks
I could just hear god damn thing over and over
He couldn't get the sickle bar down
I went and put it down so he cut cut his
8" tall fields to bale hay for some reason.

 

[dall]

I'ma have't go get chicken soup to be sure Ms. Glenda eats something. GFYs

lol better put your apron on bish

 

[41FanForLife]

Ribs are wrapped in foil and back on the grill. Dinner around 530. Time to slack for a few

 

[Kiwioilboiler]

Home and hurts like hell

Home. Good.
Hurts. Not good, but give it some time mate.

 

[full chizel]

Ribs are wrapped in foil and back on the grill. Dinner around 530. Time to slack for a few

Time to pick up your socks and sandals and slack for a few?

 

[full chizel]

Home and hurts like hell

Therapy is the hard part. The more you put in the more you'll get out and the pain of therapy now saves you a lot of pain in the future.

 

[lehman live edge slab]

Why?
How many do you have and have shot?
I have 2 tx .22s and bought 3 g3cs a g2c
For a sister and a g3 9mm.
My neighbor has a TH 9mm and bought 3 tx .22s for the kids and him.
I have Several hundred through the different pistols
And a couple thousand through the tx .22s
My sister and a great niece shoots them often.
Never had a gun failure with any of them
Bad rounds a lot with the
Old Remington golden bullet
The new production owned by vista outdoors
No more problems.

Yes actually I’ve had an issue, Taurus raging Bull 454 didn’t index properly and the bullet hit on the forcing cone sending it down barrel funny and the barrel side blew out with the outer barrel jacket hitting me in the leg. Sent in for lifetime warranty they replaced barrel and when I got it back they had the barrel on crooked. The front blade was going diagonally across the rear sight when looking to shoot. Back again to repair, got it back and shot 5 rounds cylinder locked up and wouldn’t move, managed to get it unloaded and sent back again. This time they supposedly replaced all the inside parts got it back and felt good action wise took it and the all repaired paperwork from Taurus and traded for a super Blackhawk. Second experience was a Rossi combo gun 20 gauge/.243 that wouldn’t hit the broad side of a barn. Sent it in and to fix the bad rifling at the end of the barrel they back bored the last few inches of rifling out and sent back. Didn’t realize Rossi and Taurus were affiliated at the beginning. They new the action on the raging Bull was bad but sent back the first two times with just a barrel the first 2 times. Also talked to the gunsmith my uncle uses all the time and told him this and he said he’d only taken one apart and refused to work on them. So personally I’ll never get anything affiliated with Taurus. Next one will be a smith k frame 460 or a super red hawk .454

 

[dall]

Therapy is the hard part. The more you put in the more you'll get out and the pain of therapy now saves you a lot of pain in the future.

when i had physical therapy on my hand i got yelled at by the therapist for overdoing things
but the first day i met him i said i dont care how much pain you put me in just dont bust the stitches

 

[USMC615]

roscoe is @USMC615

Lol…never seen that *s-wordt!

 

[41FanForLife]

Time to pick up your socks and sandals and slack for a few?

Came in the house with dirty work boots on. Put the sandals on to come upstairs to prep the ribs. Had to power wash front porch after that. Thats why i left the socks on..boots went back on. And I got some pretty ugly feet you should be happy I had socks on

 

[redline4]

Home and hurts like hell

I'm not a Doctor, but I'd prescribe a full weekend of hookers and blow.
You'll be golden by Monday morning.

Good to hear your home Mike.
Tell your pain GFY from me.

 

[Czed]

Yes actually I’ve had an issue, Taurus raging Bull 454 didn’t index properly and the bullet hit on the forcing cone sending it down barrel funny and the barrel side blew out with the outer barrel jacket hitting me in the leg. Sent in for lifetime warranty they replaced barrel and when I got it back they had the barrel on crooked. The front blade was going diagonally across the rear sight when looking to shoot. Back again to repair, got it back and shot 5 rounds cylinder locked up and wouldn’t move, managed to get it unloaded and sent back again. This time they supposedly replaced all the inside parts got it back and felt good action wise took it and the all repaired paperwork from Taurus and traded for a super Blackhawk. Second experience was a Rossi combo gun 20 gauge/.243 that wouldn’t hit the broad side of a barn. Sent it in and to fix the bad rifling at the end of the barrel they back bored the last few inches of rifling out and sent back. Didn’t realize Rossi and Taurus were affiliated at the beginning. They new the action on the raging Bull was bad but sent back the first two times with just a barrel the first 2 times. Also talked to the gunsmith my uncle uses all the time and told him this and he said he’d only taken one apart and refused to work on them. So personally I’ll never get anything affiliated with Taurus. Next one will be a smith k frame 460 or a super red hawk .454

Mine are semi auto

 

[Kiwioilboiler]

Came in the house with dirty work boots on. Put the sandals on to come upstairs to prep the ribs. Had to power wash front porch after that. Thats why i left the socks on..boots went back on. And I got some pretty ugly feet you should be happy I had socks on

I'm with you John. Cept I wear socks and Jandals for transition type stuff. Coz, convenience.

 

[dall]

I'm with you John. Cept I wear socks and Jandals for transition type stuff. Coz, convenience.

you guys must have sissy feet
just go barefooted

 

[lehman live edge slab]

Mine are semi auto

And they can’t fail? Like I said to each their own but there’s a reason that gunsmith won’t touch them and the pot metal internals. I’ll never own another Taurus, I now have a cz75 9mm and a kimber custom 10mm. Next one will be a big ruger or smith so I can make use of my brass dies and bullets for the .454.

 

[dall]

 

[Dream]

A tow truck

Got
Mechanic
Coming

 

[Czed]

And they can’t fail? Like I said to each their own but there’s a reason that gunsmith won’t touch them and the pot metal internals. I’ll never own another Taurus, I now have a cz75 9mm and a kimber custom 10mm. Next one will be a big ruger or smith so I can make use of my brass dies and bullets for the .454.

I've shot a lot in the 90s and early 2000s
In idpa I've shot a few different brands.
I don't blame you I'm the same way with Kimber
After the way they treated me when the springs were bad I'll never buy another.
And after seeing my friend fight them
a commander size.
Kimber cave the breech face in after a few dozen rounds
Kimber reprofiled the breech face
And it actually out of spec
When he got it back.
And when I shot idpa Kimber brought out the external extractor 1911s
That jammed constantly.
Until they went back to the traditional style.
Best semi autos I've personally had
Are cz 75s
Browning hi powers and fn hi powers.
Springfield 1911s and that first Kimber I bought in 1996 has been problem free after I fixed it.
The m&p series i have both series
has been my favorite polymer frame
The Glocks have been problem free.
And the eaa 10mm witness is a great shooter
Of the latest guns
I really like the Turkish SDS 1911s
Both I have are very accurate
The canik elite has my favorite trigger of any striker fired.
The Taurus are so inexpensive I keep one in each vehicle
And make good gifts
To each his own.

 

[dall]

Got
Mechanic
Coming

lol thats why you drive one everyday
loaded down working it

while yours sit in the drive unloaded lol

hows you slacker

 

[USMC615]

Me against these three Subway foot-longs, and a gallon of milk…who you gotcha money on?