Not So Pro 3

[Mastermind]

does it go near anything or does the string get tensioned and then knife cut ?

Twine arm passes the knife....and it should cut it. I've evidently got it out of wack. I'll get it squared away.

 

[Dream]

It was hard to breathe today. Nasty. Don't know how them swamp people in Louisiana and Florida can take it. Im sure there are other nasty humid states too.

You get used to it, and when you go to a dryer climate, your skin dries out and you itch like FUGG. Damn fingers split open and stuffs. That only happens if its a cold, dry winter down here.

 

[Woodpecker]

Sticky job.

It sure is! I have old work cloths I wear for just such jobs. I feel about the same way about spruce/pine as you do about chainsaws, but it payz da billz

Feel free to uproot all 11 and bring them here lol. They'd be perfect for the front of my property by the road.

Nah you don’t want theses they got the needle cast pretty bad. The whole other side of thems dead to about 2/3ds up.

You grind stumps too Brad?

nope fork that bs

Lil' Tex and the rubber knife gang would have had that whole job done and been home grillin up some porterhouses while giving valuable intel on things never even seen in person on the internet.
You best step up your game Brad

No joke I was a big time slacker today fo sho. Gave up the ghost after I drunk the 1.5 gallons of water/gator piss I brought for the day by 3:30. Only got 3 trees down and chipped today from about 11am to 3.

 

[Dream]

lol it was that way here
we are always humid hot or cold

Hows Master Slacker and Maddie?

 

[Dream]

Me likey bridge cranes. When I get to building a shop here, I want one in it.

Check on Gorbel and Spanco work station systems when you do.
If you only need a 1 or 2 ton system, those should fit the bill at a lower cost than an engineered system.
Probably what I'll do if I ever get around to putting up a bigger building here.

 

[Sagebrush33]

Check on Gorbel and Spanco work station systems when you do.
If you only need a 1 or 2 ton system, those should fit the bill at a lower cost than an engineered system.
Probably what I'll do if I ever get around to putting up a bigger building here.

Thanks man

I may want a bit more tonnage but I'm writing that down now. This post will be buried in 3,2,1 .....

 

[JoeDirt]

What's up nutsacks? Had a pretty light day at work today, the 92* heat and humidity still kicked my ass though.

 

[dall]

Twine arm passes the knife....and it should cut it. I've evidently got it out of wack. I'll get it squared away.

so maybe needs more tension on the string ?
i dont know what yours is

Hows Master Slacker and Maddie?

were ok coffee time and maddie says its nap time
hows you slacker

 

[dall]

What's up nutsacks? Had a pretty light day at work today, the 92* heat and humidity still kicked my ass though.

you always have a light day
surprised you even get out of your bed clothes when you go to work

 

[Dream]

Thanks man

I may want a bit more tonnage but I'm writing that down now. This post will be buried in 3,2,1 .....

They make higher capacity stuff too, but the cost gets up there pretty quick. You can go to an engineered system with what we refer to as a "kit crane" for about the same money or sometimes cheaper.
Lots of options. PM me if you get serious about it. I may be able to offer some insight.

 

[Sagebrush33]

They make higher capacity stuff too, but the cost gets up there pretty quick. You can go to an engineered system with what we refer to as a "kit crane" for about the same money or sometimes cheaper.
Lots of options. PM me if you get serious about it. I may be able to offer some insight.

I'm a ways off on that but notes taken, thank you.
At times I put big goals in front of me.

 

[Kiwioilboiler]

Easy on the amount of l’s you got in ‘tolerable’ there chief…Grammar Nazi might be loitering around the premises.

Wouldn't that be a spelling Nazis department though?

 

[dall]

I'm a ways off on that but notes taken, thank you.
At times I put big goals in front of me.

what saw is in your avatar ?

 

[Dream]

It sure is! I have old work cloths I wear for just such jobs. I feel about the same way about spruce/pine as you do about chainsaws, but it payz da billz

Nah you don’t want theses they got the needle cast pretty bad. The whole other side of thems dead to about 2/3ds up.

nope fork that bs

No joke I was a big time slacker today fo sho. Gave up the ghost after I drunk the 1.5 gallons of water/gator piss I brought for the day by 3:30. Only got 3 trees down and chipped today from about 11am to 3.

Aint even gonna bust your stones on that one Brad. Its pretty rough wallowing in that stickyass chit when its this hot. ALL the chips, needles, etc just stick to ya.

 

[dall]

Wouldn't that be a spelling Nazis department though?

hes a control freak lol until you just mess with him on purpose lol

 

[Dream]

I'm a ways off on that but notes taken, thank you.
At times I put big goals in front of me.

Me too main.
Be 50 in a couple years.
If it doesnt happen before I'm 55, I probably aint doing it.

 

[dall]

Me too main.
Be 50 in a couple years.
If it doesnt happen before I'm 55, I probably aint doing it.

slacker

 

[Dream]

so maybe needs more tension on the string ?
i dont know what yours is

were ok coffee time and maddie says its nap time
hows you slacker

More gooder now.
Finally got that shutdown done. Made it home about 8 tonight.
Gotta play catchup with breakdowns rest of the week.

 

[Dub11]

Wtf are cutting with it Wayne, trees?

Trashy over growth and stuff.

 

[Dream]

Twine arm passes the knife....and it should cut it. I've evidently got it out of wack. I'll get it squared away.

Timing off mebbe?