Not So Pro 3

[Slumberjack]

If you reckon its a mutt to do then it must be. I'll get my 262 and one of the 357s out together one day and work out why. Then i'll probably just start them and piss rev em a bit and forget all about it....

Lol makes me miss my 357 but this is really just for learning. I like tinkering or I get depressed. Just gotta keep my mind busy

 

[dall]

If you reckon its a mutt to do then it must be. I'll get my 262 and one of the 357s out together one day and work out why. Then i'll probably just start them and piss rev em a bit and forget all about it....

about the only way to find lost screws

No boat anchors involved.
That was my spare. That tire was low yesterday evening in Kentucky. I swapped it out and filled it up.
It's got a slow leak I couldn't immediately find.
The spare exploded 40 miles from home, right before a wayside, so I put the leaky tire on and made it home.

Paint that tractor yet?

lol nope
How’s you slacker

 

[redline4]

about the only way to find lost screws

lol nope
How’s you slacker

Other than the tire and messed up fender, pretty good. Trip went well, I even was on the local news in Panama city Beach when I was leaving one of the venues.
My wife was watching the news and goes, "hey, I just saw some dumbazz that looks just like you"..

Back to work tomorrow.
I give it until 8:30 before I'm telling others to fornicate with themselves.

 

[Dream]

Sup pig lickers?
I'm back in 'Sconsin.
View attachment 293280
Minus a tire. And a jacked up fender.

That'll buff out...

 

[Dream]

Nice! Got the appliances fixed up?

Nope, but the old one is now chilling in the junk trailer.
Dads got a used one I'll go get one day next week. That'll do til Bosslady gets back, then she can pick out which ones she wants.

 

[ayoungtexan]

Good evening fellas

 

[Mastermind]

 

[Slumberjack]

Nope, but the old one is now chilling in the junk trailer.
Dads got a used one I'll go get one day next week. That'll do til Bosslady gets back, then she can pick out which ones she wants.

Hahha you said that right lol

 

[Kiwioilboiler]

Nope, but the old one is now chilling in the junk trailer.
Dads got a used one I'll go get one day next week. That'll do til Bosslady gets back, then she can pick out which ones she wants.

Not that i want this to turn in to Laundry Boys Weekly, but......make sure you check the cycle times on anything new. Our old machine failed and me and Mrs Adam got talked into a Miele combo. Front Load wash and heatpump dryer. SSSSlllllllloooooooowwwwwwwwwww. Nobody got time for dat no matter how well made it might be. Wash em, dry em, get on with life.

 

[Kiwioilboiler]

Randy i owe you an apology.
A couple of pages back i made a joke about your legs and the Sweat Lodge. I only then read up and learned myself of the spiritual content to the procedure. I wouldn't normally joke about anyone's belief structure, and it won't happen again.

Sorry.

Adam.

 

[Lightning Performance]

Not that i want this to turn in to Laundry Boys Weekly, but......make sure you check the cycle times on anything new. Our old machine failed and me and Mrs Adam got talked into a Miele combo. Front Load wash and heatpump dryer. SSSSlllllllloooooooowwwwwwwwwww. Nobody got time for dat no matter how well made it might be. Wash em, dry em, get on with life.

We got a Miele dish washer G 870 SC. Solid machine 18+ years old.

 

[Mastermind]

Randy i owe you an apology.
A couple of pages back i made a joke about your legs and the Sweat Lodge. I only then read up and learned myself of the spiritual content to the procedure. I wouldn't normally joke about anyone's belief structure, and it won't happen again.

Sorry.

Adam.

LOL

You don't owe me an apology. I'm not even sure what you are talking about.

If y'all quit picking on me, I'd figure yinz was mad at me.....plus, GFY.

 

[cuinrearview]

Ok here’s how I adapted 357 carb to my 262 project. Take it for what it’s worth.View attachment 293281View attachment 293282 View attachment 293283View attachment 293284 View attachment 293285 Choke and fast idle still work in the proper manner. I kept the stock carb intact as well as the stock linkage so I can run Them and compare them.

Looks solid Pat

If you reckon its a mutt to do then it must be. I'll get my 262 and one of the 357s out together one day and work out why. Then i'll probably just start them and piss rev em a bit and forget all about it....

Best answer

No boat anchors involved.

You left the HD at home?

 

[huskihl]

1, 2, skip a few

skip 829


Howdy.

 

[Slumberjack]

Looks solid Pat

Best answer

You left the HD at home?

Best answer indeed lol

 

[p61 western]

Good evening mfers.

 

[cuinrearview]

Good evening mfers.

GFY obscure politician. How is life Mike? Got any 394 stories?

 

[p61 western]

GFY obscure politician. How is life Mike? Got any 394 stories?

Just been doing a lot of milling with the 394. The 60 and 37 bars getting used. What have you been up to Tim?

 

[Kiwioilboiler]

Neighbour who's tree I seized my 346XB on and therefore eventually found you lot has started work at a Turkish cafe in town. Had lunch there today to support them.
Kebab lamb, fries, hummus and garlic yoghurt. DeRishUs. Or kapai in māori.


Skinny fries in honour of Randy's legs.

 

[dall]

Other than the tire and messed up fender, pretty good. Trip went well, I even was on the local news in Panama city Beach when I was leaving one of the venues.
My wife was watching the news and goes, "hey, I just saw some dumbazz that looks just like you"..

Back to work tomorrow.
I give it until 8:30 before I'm telling others to fornicate with themselves.

so we can call you *pretty boy or is that her pet name for you

Randy i owe you an apology.
A couple of pages back i made a joke about your legs and the Sweat Lodge. I only then read up and learned myself of the spiritual content to the procedure. I wouldn't normally joke about anyone's belief structure, and it won't happen again.

Sorry.

Adam.

Lol need a string pulled ? Lol

LOL

You don't owe me an apology. I'm not even sure what you are talking about.

If y'all quit picking on me, I'd figure yinz was mad at me.....plus, GFY.

lol if I was you’d know lol