Not So Pro 3

[Egg Shooter]

Huh.
Acres site said they had 3/8 LP.
Ive seen both. Cant remember, but I thought the cranks were different on the clutch end. Might have had an engine swap, or come that way. Points or electronic?

Not sure on ignition. No oil with manual oiler and bar off. Further investigation needed. I have mini mac 6 with 1/4 pitch that has a small crank. This is larger but still 1/4. I also have a new in package 1/4 clutch set up with rim and all. Its the larger crank. That came with all the parts from Steve.

 

[Slumberjack]

Beer thirty! Time to rock out with your socks out? Or something like that.

 

[41FanForLife]

Alright ham-slammers, ive had all of this work crap I can stand. I'm headed back to Northeast GA. Gonna pet the pups and hopefully Bosslady too. Hope I dont get bit.
Y'all have a wonderful weekend, and dont pull it too hard.

Drive safe buddy.

 

[Woodpecker]

Is that because pimpin ain't easy in the mitten?

Pimpin ain't easy anywhere... *b-wordes be getting out of line.

 

[41FanForLife]

Only good thing about the job being all screwed up is the fact that we get time and a half tomorrow to fix stoopid chit

 

[Egg Shooter]

I pretty-much like ALL saws.
Its GOTTA be some sort of sickness...
Except the 3400 Poo-lan ive got.
That one just likes being taken apart I guess.

Go get in the Christmas give away thread. Mini macs and poulan 20D

 

[Slumberjack]

Pimpin ain't easy anywhere... *b-wordes be getting out of line.

Always liked Wayne Brady as a pimp! *f-wordin rufless!

 

[dall]

Alright ham-slammers, ive had all of this work crap I can stand. I'm headed back to Northeast GA. Gonna pet the pups and hopefully Bosslady too. Hope I dont get bit.
Y'all have a wonderful weekend, and dont pull it too hard.

@Mastermind says put both of them in the trunk and wait

 

[dall]

damn slackers

 

[41FanForLife]

damn slackers

I know you will disagree but we didn't slack today

 

[redline4]

Close enough to 5 for me..

Time to head home.

 

[USMC615]

Ain’t had a whole helluva lot of time to fool with the gun safe the last several days. Did pile some of the arsenal in it. Got a light kit coming tomorrow, so what’s in it now gotta come out anyhow. It’s gonna get a little revamping shelf-wise, etc and may even go with no shelves but the very top shelf, and run rifle rods in everything. *s-wordt gonna get like cramped quarters before it’s over with. Been mulling over a few options...we shall see. I’ll fool with it tomorrow morning when a now seasoned 8.5 lb Boston Butt hits the smoker at sunup.

 

[dall]

I know you will disagree but we didn't slack today

still a slacker

 

[Cat 525]

Finally a bit of winter! Makes for better logging!

 

[41FanForLife]

still a slacker

GFY dik. LOL

 

[Big_6]

Ain’t had a whole helluva lot of time to fool with the gun safe the last several days. Did pile some of the arsenal in it. Got a light kit coming tomorrow, so what’s in it now gotta come out anyhow. It’s gonna get a little revamping shelf-wise, etc and may even go with no shelves but the very top shelf, and run rifle rods in everything. *s-wordt gonna get like cramped quarters before it’s over with. Been mulling over a few options...we shall see. I’ll fool with it tomorrow morning when a now seasoned 8.5 lb Boston Butt hits the smoker at sunup.

View attachment 271418

Don't forget the dehumidifier, slacker!

Sent from my SM-N975U using Tapatalk

 

[ayoungtexan]

Good evening fellas. Had steak 2 nights in a row. A ribeye and 2 tenderloins that I reverse seared on the grill. The cap on the ribeye just about fell off in the middle of cooking. Should I tie it with butchers twine to prevent that next time?

 

[Egg Shooter]

I pretty-much like ALL saws.
Its GOTTA be some sort of sickness...
Except the 3400 Poo-lan ive got.
That one just likes being taken apart I guess.

I have that same sickness. Big time

 

[dall]

GFY dik. LOL

maybe later

hows you slacker

 

[Slumberjack]

Having jonsered 2186 for supper