Not So Pro 3

[Mastermind]

Oh me no!!!!! Hope you can find replacements!

I did....some GT-40 heads.

LS that mother frenchie

Not this one.

 

[Slumberjack]

Well hell.....

Y'all know I've been building a 351W for my old ton truck. Got a call from the machine shop....turns out that the heads are cracked.

Slap some aluminum 2.02-2.05 valve 200+cc intake runners and a healthy cam! Wink wink

 

[Mastermind]

Slap some aluminum 2.02-2.05 valve 200+cc intake runners and a healthy cam! Wink wink

These heads have 175cc runners, and 2.05 valves. The cam is more of a torque stick than an RPM cam though. 262 intake duration, 272 exhaust, with 451" lift.

 

[Slumberjack]

These heads have 175cc runners, and 2.05 valves. The cam is more of a torque stick than an RPM cam though. 262 intake duration, 272 exhaust, with 451" lift.

RV cam as the old timers would call it Hahhah

 

[Mastermind]

RV cam as the old timers would call it Hahhah

Exactly. Dual plane aluminum intake, small tube headers, and an Edelbrock 750CFM vacuum secondary carb.

 

[ucm931]

Sounds like your disappointment in the cracked heads was short lived. lol

 

[Slumberjack]

Exactly. Dual plane aluminum intake, small tube headers, and an Edelbrock 750CFM vacuum secondary carb.

Still a 3.5” stroke or did you go the full 4” to a 402ci?

 

[Mastermind]

Still a 3.5” stroke or did you go the full 4” to a 402ci?

Stock stroke......060" over.

 

[Slumberjack]

Stock stroke......060" over.

That’s gonna be a great runner!

 

[Agent Smith]

Exactly. Dual plane aluminum intake, small tube headers, and an Edelbrock 750CFM vacuum secondary carb.

What oil are you running?

 

[Saw Collector]

Supposed to cut the woods. Not the fingers lol

You got that right.

 

[ucm931]

What oil are you running?

HEEEEERRRREEE WE GO! lol

 

[Mastermind]

What oil are you running?

Rotella Duh

 

[Agent Smith]

HEEEEERRRREEE WE GO! lol

LOL I did that on purpose

 

[Saw Collector]

Looks like DirtyTec gonna get a little wet...and it ain’t no two-legged ho providing the service!

View attachment 266506

Nore has one ever.

 

[ucm931]

LOL I did that on purpose

Yep, I seen what you did thar.

 

[Slumberjack]

Rotella Duh

I’ve build 600hp 12-1 compression small Chevy and ran sae 30 rotella! Right wrong or indifferent it’s great oil!

 

[Saw Collector]

That looks rather painful.

Lil bit. Cut proof glove on from now on.

 

[Slumberjack]

I’ve build 600hp 12-1 compression small Chevy and ran sae 30 rotella! Right wrong or indifferent it’s great oil!

It take a bit to get hot and make some hard dyno pulls but it’s good stuff!

 

[Saw Collector]

I thought you were going to say the head blows off of them.

Oh know you ditant!

To bad it happened after they wrecked rock for years.