Not So Pro 3

[dall]

Stuff...

Picked up a tank and swung n hit hood

slacker

 

[Boomhower]

slacker

It be fixed the boss wont ever know.

 

[dall]

Heres the 06 its got Toyos.

pretty heavy trailer

 

[Boomhower]

Where pics of adapter plate slacker

 

[dall]

Where pics of adapter plate slacker

tomorrow im not done with one side yet but i have the pieces cut out except a couple small pieces

 

[Mastermind]

Good night mfers.

 

[dall]

Where pics of adapter plate slacker

the plate was gonna be thrown away at the plant and was sent to me 2 pieces 3/8 4x8 and 3 or 4 pieces of 1/2 4x8 id say tossed out because it was in a outdoor shed and got a layer of scale on it so much a torch wouldnt cut it and the circular saw wasnt liking it either so i had to spend half the day using a needle scaler clearing the scale off so the torch would cut through it nice but tomorrow i should be just about done with it

 

[dall]

Good night mfers.

noone said you could go to bed yet

hows the thumb ?

 

[Boomhower]

tomorrow im not done with one side yet but i have the pieces cut out except a couple small pieces

Cool I dont even want to look at the cost of steel right now. You going to have enough left over for your grapple?

 

[jacob j.]

Same thing here with talk of better coming in about a year. The sooner the better.

They're putting in 5G here so I can get all the idiotic Meme's on Facebook at light speed...

 

[dall]

Cool I dont even want to look at the cost of steel right now. You going to have enough left over for your grapple?

i cut a sheet of the 3/8 down the middle for the adapter pieces and will use the 1/2 for the grapple
i have about 30 or 35 feet of 2x2 square tubing 1/4 inch wall thickness i may be able to use if not ill get a stick of 3x3 with only having the price of cylinders and hoses im ok with buying the 3x3 tubing

 

[Boomhower]

i cut a sheet of the 3/8 down the middle for the adapter pieces and will use the 1/2 for the grapple
i have about 30 or 35 feet of 2x2 square tubing 1/4 inch wall thickness i may be able to use if not ill get a stick of 3x3 with only having the price of cylinders and hoses im ok with buying the 3x3 tubing

I have a good contact for hoses when youre ready.

 

[p61 western]

They're putting in 5G here so I can get all the idiotic Meme's on Facebook at light speed...

Lol no facebook for me. How are you doing Jacob?

 

[dall]

I have a good contact for hoses when youre ready.

i usually been getting hoses from surplus center but if your contact is cheaper ill go that way

 

[p61 western]

i usually been getting hoses from surplus center but if your contact is cheaper ill go that way

Hey you got a Victor cutting head laying around you could part with?

 

[dall]

Hey you got a Victor cutting head laying around you could part with?

not sure what brand torches i have i think i have 3 of them and a rose bud setup

 

[p61 western]

not sure what brand torches i have i think i have 3 of them and a rose bud setup

See what you got, and can let go. Now your on slack time so I'll text you lol.

 

[Boomhower]

Hey you got a Victor cutting head laying around you could part with?

Search ebay for a victor ca2460 head and a 1350 body. They normally have some used ones or surplus ones pretty cheap

 

[Stihl working Hard]

Evening sir
Ya

Sent from Hoskey hilltop

Thanks Mark

 

[Stihl working Hard]

My wife insisted on bandaging it up. So now....it is throbbing a little. LOL

View attachment 263378

How many times have you knocked it since you bandaged it