Not So Pro 3

[JoeDirt]

what size cylinder
And that stuff can be changed

Its been a while since I looked at it but I know there are some that are close, but I haven't found one that was the exact right size. Found this from Google-

The angle cylinder base = 1 3/4"
The rod diameter is 5/8"
The total length of the cyl body is 9" with a 1/2" dia mounting hole in the base.
The extended length is 15" from center to center, from the 1/2" pin in the base to the 1/2" pin moment welded on the end of the piston.

 

[Dream]

View attachment 355773
You girls have nothing on the bolens lol

Onan motor?
Wheres the heat, AC, and radio slacker?
I'm assuming its at least got an ashtray and a 12 volt outlet for a Mr coffee.

 

[Dream]

Welp....today is my 17 year anniversary of getting clean and sober. 3 of my friends also have a milestone in recovery this month. We're gonna have a shindig Friday night with food and cake. All y'all is invited.

I'm gonna take a raincheck, because I'm the guy that would show up half fugged up(cause I ran outta money).
Just kidding. I understand addiction my friend. Have lived with it my whole life.
Congrats on another year clean and sober. Keep putting one foot in front of the last and breath in/out.
The things we get to see and do while NOT fugged up far outweigh any temporary pleasure we perceive from chasing a non-existent goal.

 

[Mastermind]

We worked up a bunch of deer today. Over 50 lbs ground, and mixed with beef and bacon. Couple of dehydrators going with some sliced, and some from a jerky gun. Tired is the word.

 

[Hinerman]

Welp....today is my 17 year anniversary of getting clean and sober. 3 of my friends also have a milestone in recovery this month. We're gonna have a shindig Friday night with food and cake. All y'all is invited.

GTG at Randy’s Friday night. Pass the word…

 

[Dream]

We worked up a bunch of deer today. Over 50 lbs ground, and mixed with beef and bacon. Couple of dehydrators going with some sliced, and some from a jerky gun. Tired is the word.

Still better than paying someone else to do it.
We never had anyone process ours when I was a kid.
We have always dressed and quartered ours.
Had a local shop "process" two deer that the boy and I killed years ago. Was VERY disapointed. Took them a cooler with dressed meat to make into jerky cuts and burger.
Was obvious that we didnt get back the same amount of meat, nor the same quality that we dropped off.
Wont do that again.

 

[dall]

Onan motor?
Wheres the heat, AC, and radio slacker?
I'm assuming its at least got an ashtray and a 12 volt outlet for a Mr coffee.

lol ac in the winter and heat in the summer
23 hp kohler 2 speed rearend hydrostatic transmission

 

[Kiwioilboiler]

Good milestone @Mastermind . If herding us cats hasn't made you waver by now then I think you've found a good place for yourself.

 

[timg]

Welp....today is my 17 year anniversary of getting clean and sober. 3 of my friends also have a milestone in recovery this month. We're gonna have a shindig Friday night with food and cake. All y'all is invited.

Congratulations Boss Man, That's no easy achievement. Something to be very proud of, follow the faith that got you to this point in your life Randy.
For the rest of the Clown Pro Snow Brigade, put them antique tractors away for now. Going up to mid 40's this week supposedly. Although right now a brisk 12deg. Keep smiling and enjoy the short week.

 

[JugHead27]

View attachment 355773
You girls have nothing on the bolens lol

I bet the windows fog up and u can’t see chit lol

very cool little tractor though

 

[41FanForLife]

Good milestone @Mastermind . If herding us cats hasn't made you waver by now then I think you've found a good place for yourself.

Well said Adam.

 

[41FanForLife]

Congratulations Boss Man, That's no easy achievement. Something to be very proud of, follow the faith that got you to this point in your life Randy.
For the rest of the Clown Pro Snow Brigade, put them antique tractors away for now. Going up to mid 40's this week supposedly. Although right now a brisk 12deg. Keep smiling and enjoy the short week.

I heard we getting to 50. Veritable heat wave. Gonna use that weather to hang some Christmas lights for Big Red.

 

[Lnk]

Good morning all. Always good to hear of someone's success. Also like to look at tractors, anyone got any of those rear engines Gravely tractors? Always wanted one of them. Don't really have a need for one, so that is not stopping me.

18 going to 54 today. What a temperature roller coaster!

 

[41FanForLife]

Found a coffee maker for @dall . Don't think a regular power inverter is gonna do the trick.

 

[USMC615]

I bet the windows fog up and u can’t see chit lol

very cool little tractor though

The windows fog 'cause it's nothing but fap city and heavy breathing when he's in it...can you imagine the strokes per minute that poor little pecker is the victim of?

 

[USMC615]

Morning fapsters...30 to 60 and clear.

 

[Mastermind]

GTG at Randy’s Friday night. Pass the word…

Come on....I'm not gonna be here anyway. LOL

Still better than paying someone else to do it.
We never had anyone process ours when I was a kid.
We have always dressed and quartered ours.
Had a local shop "process" two deer that the boy and I killed years ago. Was VERY disapointed. Took them a cooler with dressed meat to make into jerky cuts and burger.
Was obvious that we didnt get back the same amount of meat, nor the same quality that we dropped off.
Wont do that again.

I'd rather do it with the family than pay someone. We have a slicer, and a good grinder. Could always use more freezer space, but we manage.

 

[Mastermind]

Good morning men.

 

[JugHead27]

I heard we getting to 50. Veritable heat wave. Gonna use that weather to hang some Christmas lights for Big Red.

A week ago it was 72, today 20

The windows fog 'cause it's nothing but fap city and heavy breathing when he's in it...can you imagine the strokes per minute that poor little pecker is the victim of?

Lol imagine how bad it would be to crop dust yourself in that tiny cab

 

[JoeDirt]

Morning tractor brigade and associates...
Cold as balls here. Glad to hear it's warming up because I gotta cut up a bunch of oak this week. My uncle is bringing his splitter over on Friday or Saturday but I gotta get these logs noodled into workable pieces.