Not So Pro 3

[timg]

Here's an example of Vajayna's fine work.
6,000 miles ago he had this for an oil leak.
He replaced the cam cover. They do leak, and they are easy...
View attachment 321807

And here it is again, still leaking...from the not so easy front cover gasket and oil pan. Just because you fix one leak, spray it down with degreaser and hose it off doesn't mean the other leaks will fix themselves.

View attachment 321808

I'm sure your adding a re-do work order number to your requisition as per Vajayna's. There goes your Christmas present and Oh my the saga continues LOL!!

 

[Wonkydonkey]

Ok, so whats this springy doohickey for?
The original one didnt have that.
View attachment 321829

Clutch drum spur, looks a tiddy bit worn

like all of them are

 

[timg]

Haters gonna hate...
View attachment 321816

And lover's gotta LUV the Rumble Bee's. I'm wif ya Brently!!

 

[Kiwioilboiler]

Tough morning here lads.

Can't find my Gearwrench 120xp 1/4 ratchet and a 10mm Toptul tube socket.

The one I was using yesterday, tired and in a hurry.

I told that damn ratchet a million times "Don't run with 10mms, they always the first to go".

 

[cus_deluxe]

Can't find my Gearwrench 120xp 1/4 ratchet and a 10mm Toptul tube socket.

Its always that damn 10mm that goes missing isnt it

 

[Wonkydonkey]

Tough morning here lads.

Can't find my Gearwrench 120xp 1/4 ratchet and a 10mm Toptul tube socket.

The one I was using yesterday, tired and in a hurry.

I told that damn ratchet a million times "Don't run with 10mms, they always the first to go".

Damm who used it last.. best interrogate them soon.
Btw.
did you have one of dem trackers on it. If not it be long gone “bye bye” now.

 

[p61 western]

Pulled out 4 people this morning so far.

 

[timg]

Dang, That was a heavy wet snow Mike. How yinz guys run them big old rubbers in dat stuffs??
Never mind, I'll answer very carefully. Lude enough LOL!

 

[Mastermind]

Tough morning here lads.

Can't find my Gearwrench 120xp 1/4 ratchet and a 10mm Toptul tube socket.

The one I was using yesterday, tired and in a hurry.

I told that damn ratchet a million times "Don't run with 10mms, they always the first to go".

Sad dayz.

 

[timg]

Tough morning here lads.

Can't find my Gearwrench 120xp 1/4 ratchet and a 10mm Toptul tube socket.

The one I was using yesterday, tired and in a hurry.

I told that damn ratchet a million times "Don't run with 10mms, they always the first to go".

Check the boat in the yard Adam

 

[Stump Shot]

Dallas ain't never had legs like that.

You left yourself wide open for a leg joke here...

 

[Stump Shot]

It's a double dip Randy moving day, cold in the morn', snow in the afternoon.

 

[p61 western]

Dang, That was a heavy wet snow Mike. How yinz guys run them big old rubbers in dat stuffs??
Never mind, I'll answer very carefully. Lude enough LOL!

Air down to 10# and does great.

 

[hoskvarna]

Air down to 10# and does great.

Like rock crawling eh
Those hummer tires grab good
Do you carry a compressor to air back up


Sent from Hoskey hilltop

 

[redline4]

I'm sure your adding a re-do work order number to your requisition as per Vajayna's. There goes your Christmas present and Oh my the saga continues LOL!!

It doesn't pay to say anything to anyone here about it because for whatever reason after all the chit, he's still here.
So, I just occasionally grumble to my wife and friends about the ridiculousness of it all and do the job required. Someone has to do it.

We have a recall on the Cad SRX, Buick Lacrosse and Chevy Malibu for rear toe links. Suppose to replace and do alignment...
Well, some of the SRX are returning due to poor handling in snow, so the Prodigy is doing the alignment he didn't do, but got paid too...

Here he is after doing a LaCrosse.


Evidently his computer is more important than doing the job he got paid to do.
And Daddy knows all about it. Just this morning he had to do an alignment, manager said something and I told him it's because he never did it in the first place.

 

[timg]

Air down to 10# and does great.

Yes, Guess that's like two skinny duals
Outer wall biters, Gotcha LOL

 

[Dub11]

It doesn't pay to say anything to anyone here about it because for whatever reason after all the chit, he's still here.
So, I just occasionally grumble to my wife and friends about the ridiculousness of it all and do the job required. Someone has to do it.

We have a recall on the Cad SRX, Buick Lacrosse and Chevy Malibu for rear toe links. Suppose to replace and do alignment...
Well, some of the SRX are returning due to poor handling in snow, so the Prodigy is doing the alignment he didn't do, but got paid too...

Here he is after doing a LaCrosse.
View attachment 321854

Evidently his computer is more important than doing the job he got paid to do.
And Daddy knows all about it. Just this morning he had to do an alignment, manager said something and I told him it's because he never did it in the first place.

Setting like that makes me think he's a she.

 

[Mastermind]

You left yourself wide open for a leg joke here...

Still sicky. Off my game. Hit me.

 

[Mastermind]

Glenda is insisting that I visit the doc. I told her that if I was seeing the mfer, so was she. So we got tag team appointments for tomorrow.

 

[redline4]

Glenda is insisting that I visit the doc. I told her that if I was seeing the mfer, so was she. So we got tag team appointments for tomorrow.

Sounds kinky.
Get video.