Not So Pro 3

[cuinrearview]

So.... I must be easing up on my OCD just a hair. After much internal deliberation, that leaking tiller can go fugg itself and leak away. Gear lube is easy to come by and I just can't give any more fooks about it. Just leaves a few drips on the concrete after use. The tipping of the scales was my neighbors, that have the identical tiller under a different name, told me theirs leak. Same spot and not long after they bought it. King Kutter makes them both. I'm still going to get all the seals and gaskets on their dime under the warranty but im not installing them unless its bleeding to death. This is a milestone for me. GFYs.

I've heard gear oil is like sunflower HGH.

 

[41FanForLife]

I've heard gear oil is like sunflower HGH.

30 weight sunflower oil? Never seen that at Wally World

 

[dall]

So.... I must be easing up on my OCD just a hair. After much internal deliberation, that leaking tiller can go fugg itself and leak away. Gear lube is easy to come by and I just can't give any more fooks about it. Just leaves a few drips on the concrete after use. The tipping of the scales was my neighbors, that have the identical tiller under a different name, told me theirs leak. Same spot and not long after they bought it. King Kutter makes them both. I'm still going to get all the seals and gaskets on their dime under the warranty but im not installing them unless its bleeding to death. This is a milestone for me. GFYs.

lol aft slacker
King kutter stuff is junk

I'm so proud. Our little boy is finally growing up !!!!!

lmao he still breast feeds

 

[Lightning Performance]

Clogged vent?... idk







Busted, no saws, no delivery dates, no nuttin, fook.

Looked at pro saw sheets back order since April, again, half or more are paid for already. Who wants a 311? Lol 24" all rigged


400's is plentiful
This sucks
Should try getting an 881
Didn't even ask about one anywhere.
Saw nothing pro, anywhere

 

[Mastermind]

Anybody want to buy and 084? 1150 ported 1450
How about a 460? 200T? Let me know with or without.
Got more coming in. Too much chit here now.
Going saw shopping in about an hour.
Looking for 200TCMs, 462's and maybe a 400 to dig into.

Let's see some pictures of the tools you use to port with Kenny. Your lathe....Foredom......right angle stuff.

 

[Lightning Performance]

Couple more days of hot and hazy mid week and then it gets nice again. All the nasty is finally blowing out to sea tonight.
91, nice tomorrow showers Wednesday and then more fresh air from the UP we be hopin'

 

[Mastermind]

Anybody want to buy and 084? 1150 ported 1450
How about a 460? 200T? Let me know with or without.
Got more coming in. Too much chit here now.
Going saw shopping in about an hour.
Looking for 200TCMs, 462's and maybe a 400 to dig into.

You just quoted a price to port a saw for 300.00

I wanna see the tools you are gonna use to make it worth 300.00

And soon.

 

[Mastermind]

We've bailed enough mfers out that paid good money for crap.

Put it up.

 

[Mastermind]

I'm not fughin around on this. Put it up.....now.

 

[Lightning Performance]

Foredom is hanging in my laundry room.
Right angle is a Blue Point mini air job. Not a 90.
Lathes are next door at the machine shop with plenty more cool tools. I don't want machine work.


You are one skeptical mfer lol.

I'm eating right now ya ol' hack.
Need a new right angle so sell me your rebuilt one. New is near 700 now I think. Could burn up little contra angles again.

 

[Mastermind]

You are one skeptical mfer lol.

I sure am. I've been reading straight horseshit outta you for years. Never seen anything from you. Nothing. Ever. Just horseshit.

Now we got guys saying you message them asking to port saws for them. And here you are pricing the work as though you have a proven track record.....but all you have is horseshit.

Understand?

 

[Lightning Performance]

I sure am. I've been reading straight horseshit outta you for years. Never seen anything from you. Nothing. Ever. Just horseshit.

Now we got guys saying you message them asking to port saws for them. And here you are pricing the work as though you have a proven track record.....but all you have is horseshit.

Understand?

Oh boy. You better take a pill chief.

I'm not full of chit.
And I don't talk chit.
*f-word you straight up.
You'll get your pics in ten minutes.

Been waiting for this horse *s-word from someone.
Just cause I don't post my work or sell saws here doesn't mean a damn thing. I was porting heads before you new wtf to do with them.
I'll expect an apology for wasting my good mood today.


You'll get your pics and I might just advertise here.
Sweat house cooked your brain.
PM me your cell number you want pics of my work I might send a few.

Brb
Posting your needed tool pics so you can chill.

 

[Mastermind]

Oh boy. You better take a pill chief.

I'm not full of chit.
And I don't talk chit.
*f-word you straight up.
You'll get your pics in ten minutes.

Been waiting for this horse *s-word from someone.
Just cause I don't post my work or sell saws here doesn't mean a damn thing. I was porting heads before you new wtf to do with them.
I'll expect an apology for wasting my good mood today.


You'll get your pics and I might just advertise here.
Sweat house cooked your brain.
PM me your cell number you want pics of my work I might send a few.

Brb
Posting your needed tool pics so you can chill.

You're about to get your ass booted the hell out of here "Chief".

I kept hearing about you approaching people in PMs......but sorta ignored it. Till today.

 

[Mastermind]

You'll get your pics in ten minutes.

Is that how long it takes for you to go to the laundry room?

 

[Lightning Performance]

Your getting what you wanted so relax

 

[Dub11]

Afternoon folks

 

[Mastermind]

Your getting what you wanted so relax

Doubtful. I've pretty much made my mind up about how this is gonna end.

 

[Lightning Performance]

Tools are stored away currently.

Not pulling out any more anything.
Have over 300 burrs and hundreds of stones.
I will get your cell cell number from someone soon.



That one black tool box has a bunch of everything in it.

Ask anyone I've bought from here.
No issues, no problems.
Might list a few for sale, might not now.

Enjoy your evening men.
I don't need this and main reason I dont try to sell here.

 

[Mastermind]

Tools are stored away currently.

Not pulling out any more anything.
Have over 300 burrs and hundreds of stones.
I will get your cell cell number from someone soon.

View attachment 303234

That one black tool box has a bunch of everything in it.

Ask anyone I've bought from here.
No issues, no problems.
Might list a few for sale, might not now.

Enjoy your evening men.
I don't need this and main reason I dont try to sell here.

If you had ever once posted any pictures, or videos of saws you ported.....I might not have these doubts. But never even at a gtg have you whipped out a saw that you ported and showed it off. That doesn't make any sense at all, and I still think you are simply full of horseshit.

 

[Mastermind]

Might list a few for sale

I'd rather you did not.