New score

[jakethesnake]

 

[dahmer]

Hope you have a few bucks left over to purchase a new file.

 

[jakethesnake]

Hope you have a few bucks left over to purchase a new file.

I’m not following ?

failed to mention this stuff was given to me. I was more curious about what I’ve got here.

 

[dahmer]

I’m not following ?

failed to mention this stuff was given to me. I was more curious about what I’ve got here.

Just noticed that the file for the sharpener was pretty rough. If you got all that for free you got a fantastic deal.

 

[jakethesnake]

Yeah I think I’ve got a half dozen or so files just wondering about parts avail whatnot @Philbert

 

[Philbert]

Looks like you got an older style Oregon spinner and breaker, along with a Granberg style clamp on file guide.

All good stuff, although, there is clearly some rust involved. I would disassemble, and clean off all of the rust, using ScotchBrite pads under running water, followed by soaking in vinegar or citric acid, or a commercial product like ‘Evapo-Rust’.

Parts for the older, Oregon spinner and breaker, including punches, spinner anvils, etc., used to be available from Oregon.

There are some threads on these on A.S.

Philbert

 

[Philbert]

I have the parts diagram for newer Oregon spinner breaker sets, but not for those models. These may help, although, the part numbers (and shapes / appearance) are different.


Philbert

 

[slackinoff]

I have had good luck with evaporust on old saw mufflers. You can re use it several times too, just funnel it back into the bottle.

Harbor Freight has it for about 9 bucks

 

[president]

View attachment 325414 View attachment 325415 View attachment 325416

is the spinner/breaker set made from light alloy or cast ?
they came with both ?
what did they cost you?

 

[jakethesnake]

is the spinner/breaker set made from light alloy or cast ?
they came with both ?
what did they cost you?

They’re mounted to that board so I didn’t check. I believe they’re cast. They were given to me

 

[jakethesnake]

The breaker does move seems the old feller greased it up before putting it in his shed. The spinner is free where you “spin” the clamp is frozen. I’ll put some on on it. See what happens. Looks like fine thread with no pitting. Should break loose.

 

[Duane(Pa)]

Handy as a pocket on your shirt. Free is moar gooder yet...

 

[pbillyi69]

nice thats the chain break and spinner i use....free is the best price ever

 

[jakethesnake]

Oh I did get them broke loose. Liked the threads up w some 2 cycle oil. Everything works smooth now.