- Local time
- 5:13 PM
- User ID
- 450
- Joined
- Jan 8, 2016
- Messages
- 1,411
- Reaction score
- 5,235
- Location
- Kentucky
Been saying for some time now that I was going to downsize. Too many saws that just don’t get the run time they should and I just don’t have time to port them. I have 3 MS 660’s, 1 short case 066, 2 064’s and a MS 650 that I’m going to list here. All 7 saws are bone stock for the most part except all 7 have the baffle removed inside the muffler and several have ignition advance. I had planned on keeping one of the 7 but a member here and a guy I consider to be a great friend is building me a beautiful 064/066. So these all can go.
Starting with a MS 660:
All OEM except for cylinder cover and outer spike.
WJ-69 carb. New OEM fuel line/fuel filter.
Timing advance (see picture)
Baffle removed inside muffler as pictures will show. Saw was tore down to case and pressure/vac tested. It passed. Bearings are smooth. Will post video to accompany pictures shortly.
Sold PHO $525 plus shipping from 42748.
I’ll add a red97 deflector if the buyer wants with 3 coats of flat black high temp engine paint to the muffler for $550 plus shipping.
Starting with a MS 660:
All OEM except for cylinder cover and outer spike.
WJ-69 carb. New OEM fuel line/fuel filter.
Timing advance (see picture)
Baffle removed inside muffler as pictures will show. Saw was tore down to case and pressure/vac tested. It passed. Bearings are smooth. Will post video to accompany pictures shortly.
Sold PHO $525 plus shipping from 42748.
I’ll add a red97 deflector if the buyer wants with 3 coats of flat black high temp engine paint to the muffler for $550 plus shipping.