SOLD KEEPING IT

[Mastermind]

Ok, we'll go with that

How did it do at Matts?

 

[Deets066]

How did it do at Matts?

Did pretty good, it hangs in there with the 365's

Adam knocked me out though

 

[Mastermind]

Not by much. Close race !!!

 

[Deets066]

Not by much. Close race !!!

Yeah, hard to win the 4 cube with the crowd that was at Matt's. Lot of fast 365's

 

[Mastermind]

Yeah, hard to win the 4 cube with the crowd that was at Matt's. Lot of fast 365's

I was on the phone with Wiggs for an hour and 45 minutes this morning.

 

[Deets066]

I was on the phone with Wiggs for an hour and 45 minutes this morning.

Did he tell ya I tried to cut his arm off?

 

[Mastermind]

Did he tell ya I tried to cut his arm off?

Yep. He did.

Changing ends is pretty dangerous really.

 

[cgraham1]

Here’s mine, with a Dolmar 7900 wrap handle and AM spikes, and a 32” Sugi...

 

[cgraham1]

this is the 81cc hybrid 7910 piston and cylinder on the 665 its very fast and aggressive I have bought three of these in total all brand new and only ran one and sold it regretted it and bought 2 more specifically to collect. I have never ran either of these saws they are new mint condition just as I have received them from mastermind he probably ran each of them to ensure proper function after porting but that would be all they have seen. When I say there excellent mint I mean it if you need pics I can send them to your phone

I wouldnt feel at all bad to keep them

Do your saws have the 272xp unlimited coil?

 

[cgraham1]

Decided to put the 32” Sugi on my 288xp, and go with a 28” on the Solo...

 

[rocco490]

Do your saws have the 272xp unlimited coil?

no I kept the stock coils on there the saw turns less than the limiter in wood and the stock coils have a better ignition curve

 

[cgraham1]

no I kept the stock coils on there the saw turns less than the limiter in wood and the stock coils have a better ignition curve

I’ve also heard that... my ported 7900 had the stock coil and I never had a problem with tuning, or anything else for that matter.

 

[dustinwilt68]

My 7910 has a stock coil 13,000 rpm from a 665, i love mine and wouldn't consider swapping it to a 272 coil.

 

[cgraham1]

My 7910 has a stock coil 13,000 rpm from a 665, i love mine and wouldn't consider swapping it to a 272 coil.

Mine came with the 272 coil. It seems to rev fine and have good power. My 7900 had the stock coil, and a Poleman carb, and it also ran awesome. I never ran them side by side, but probably should have done that before I sold the 7900.

 

[cgraham1]

BTW, the oiler on my Solo seems to work exceptionally well... it oils the crap out of that 32” bar. It seems like the Dolmar would max out at a 28” unless the oiler was modified... unless I’m imagining things.

 

[Deets066]

Some coils may be a touch different, I had the stock coil in about 5-6 different places. Never did get it where I liked it. 272 OEM coil worked really well for me. But, that's just one saw.

 

[Roadfxr]

I asked Randy about the 272 coil for mine when he was doing it. He said he didn’t feel it was necessary and so far in my experience with it. I would completely agree with him.

 

[dustinwilt68]

I have a Makita in the works, should be very special when done

 

[Deets066]

I have a Makita in the works, should be very special when done

Me too

 

[dustinwilt68]

Cool