- Local time
- 10:32 PM
- User ID
- 3634
- Joined
- Jul 22, 2017
- Messages
- 823
- Reaction score
- 2,737
- Location
- San Antonio, TX
The Jonsereds 62 is a 56cc saw made for only two years - 1969-1970. This saw is the predecessor to the 621, and they seem to be fairly rare, especially compared to the 621.
I sourced this one when I was living in Italy; I believe it came from my friend Niklas in rural northern Sweden, but I'm not positive. It's just been collecting dust on my shelf for about 7 years, so it's time to move it on down the road.
It has 198 psi compression, so she's plenty stout. Saw has spark. It should run on a prime, or it might be a run off the tank, but I'd plan to rebuild the carb and replace the fuel lines first.
Comes with what I believe to be an original Jonsereds roller tip bar, but the roller is damaged. No chain. These take the same bars as a 621, so replacement bars are easy to find.
Clutch cover on the saw is damaged, but I'm including a nice replacement one with similar patina.
$200 + shipping from zip 78248.
I sourced this one when I was living in Italy; I believe it came from my friend Niklas in rural northern Sweden, but I'm not positive. It's just been collecting dust on my shelf for about 7 years, so it's time to move it on down the road.
It has 198 psi compression, so she's plenty stout. Saw has spark. It should run on a prime, or it might be a run off the tank, but I'd plan to rebuild the carb and replace the fuel lines first.
Comes with what I believe to be an original Jonsereds roller tip bar, but the roller is damaged. No chain. These take the same bars as a 621, so replacement bars are easy to find.
Clutch cover on the saw is damaged, but I'm including a nice replacement one with similar patina.
$200 + shipping from zip 78248.
