Woodslasher
Teh debil
- Local time
- 12:43 PM
- User ID
- 15993
- Joined
- Mar 18, 2021
- Messages
- 3,662
- Reaction score
- 14,972
- Location
- Commiefornia
Much as I hate to do it, it's time to send my CP125 down the road. I got this saw a few years ago as a non-running project. I installed new crank seals, a Duke's intake boot, carb kit, and fuel lines on it and got it running. It's an ex-logging saw so it's not mint, but overall it's in pretty good shape.
The original recoil base was rotted out so I sourced and installed a N.O.S. McCulloch unit. I also sourced a pair of N.O.S. bar plates for it while I was at it. The fan shroud was cracked but it's been welded up, it also has some pitting on the underside of it. The tape on the handle is just to hold the grip insert in, there's no damage underneath. The one a/v washer is delaminating, but I don't believe it's a real issue. The only real problem with it is the clutch nut is stripped. The clutch is tight and doesn't slip, but if you ever want to remove it that'll be a bit difficult.
It'll come with a 52" .404 x 0.063 Cannon bar and a loop of Oregon chipper chain, and a box of misc parts I accumulated during the build. I'm happy to get more pictures or answer any questions about it. I'd like $1200 + the ride for the package, but I'm open to offers.
The original recoil base was rotted out so I sourced and installed a N.O.S. McCulloch unit. I also sourced a pair of N.O.S. bar plates for it while I was at it. The fan shroud was cracked but it's been welded up, it also has some pitting on the underside of it. The tape on the handle is just to hold the grip insert in, there's no damage underneath. The one a/v washer is delaminating, but I don't believe it's a real issue. The only real problem with it is the clutch nut is stripped. The clutch is tight and doesn't slip, but if you ever want to remove it that'll be a bit difficult.
It'll come with a 52" .404 x 0.063 Cannon bar and a loop of Oregon chipper chain, and a box of misc parts I accumulated during the build. I'm happy to get more pictures or answer any questions about it. I'd like $1200 + the ride for the package, but I'm open to offers.
