Johnmn
Here For The Long Haul!
- Local time
- 8:39 PM
- User ID
- 908
- Joined
- Feb 18, 2016
- Messages
- 3,406
- Reaction score
- 12,181
- Location
- Minnesota
So long story short I bought this as a heated handle runner but here's what I had to do to it.
Bearings, seals, fuel line, filter, gaskets, carb kit ECT. Flywheel side bearing was bad when I received it. Heated handles do not work but I haven't even tried to figure out why. Someone along the way cut the cylinder extensions off by the transfer ports like a 346 and added a second exhaust port. I reused the piston because at that point I honestly didn't care, it's not bad, usable, but the saw it priced accordingly.
I have ran 2 tanks through it now and it's starting to come alive.
Hows $350 friends and family plus shipping sound?
That sound give someone room for a new piston and get the heat working if the choose to do so.
Bearings, seals, fuel line, filter, gaskets, carb kit ECT. Flywheel side bearing was bad when I received it. Heated handles do not work but I haven't even tried to figure out why. Someone along the way cut the cylinder extensions off by the transfer ports like a 346 and added a second exhaust port. I reused the piston because at that point I honestly didn't care, it's not bad, usable, but the saw it priced accordingly.
I have ran 2 tanks through it now and it's starting to come alive.
Hows $350 friends and family plus shipping sound?
That sound give someone room for a new piston and get the heat working if the choose to do so.
Last edited:
