I.D this full wrap

[Woodwackr]

266-372

 

[ErnieG]

395
View attachment 444167View attachment 444168View attachment 444166

That has the third whole on the clutch side for the spring av.
I think you are rite on with the 266
Ernie

 

[Woodslasher]

I say nope on both. 266/272 wraps almost look round while his is squared off, 395 has the same issue. Plus, there's that weird sharp 90 on the FW side as opposed to on the pto side where those sharper angles are typically found.

 

[ErnieG]

266-372View attachment 444169View attachment 444170View attachment 444171View attachment 444172View attachment 444173

What center to center on the mounting bolts ?

 

[Woodwackr]

I say nope on both. 266/272 wraps almost look round while his is squared off, 395 has the same issue. Plus, there's that weird sharp 90 on the FW side as opposed to on the pto side where those sharper angles are typically found.

And, his doesn’t have the clutch leg bevel. Good call.

 

[Woodwackr]

What center to center on the mounting bolts ?

Which ones?

 

[Woodwackr]

So, Ernie...in the process of looking through my handle piles I found 2, not 1...288 Pro-Safty wraps
However, I do not have any 88 thread self tap screws that are long enough for the bottom. Need 2" and my longest are 1 1/4".
These things are quite a bit beefier…and heavier, than the stock wrap.

 

[ErnieG]

Which ones?

Measurement from av side center to center ...

Ernie

 

[Woodwackr]

Measurement from av side center to center ...

Ernie

No comprende

 

[ErnieG]

266-372View attachment 444169View attachment 444170View attachment 444171View attachment 444172View attachment 444173

The measurements on mine are identical to yours so I'm gonna call this a 266-72 full wrap .

Ernie

 

[ErnieG]

The measurements on mine are identical to yours so I'm gonna call this a 266-72 full wrap .

Ernie

Cancel that order ...it does NOT fit the 266 so the mystery continues!

Ernie