FOUND IT Husqvarna 51/55 46mm Cylinder

[Magic_Man]

Hey Folks, Looking for a useable 46mm jug to fit a 50/51/55 series Husqvarna. I know there are lots of these saws around laying in parts piles. Let me know what you have, don't really want to buy aftermarket.

 

[t4driller]

I have a 45mm.

Sent from my SM-G925V using Tapatalk

 

[Jimmy in NC]

Let me dig tonight...may have something for you

 

[Magic_Man]

I have a 45mm.

Sent from my SM-G925V using Tapatalk

Need a 46mm, thanks.

 

[Jimmy in NC]

Looks worse than it is. I started cleaning it up then got a Black Friday closed port from HL. Decomp isnt drilled or tapped.

Yours for the ride if you want it.

 

[Magic_Man]

Looks worse than it is. I started cleaning it up then got a Black Friday closed port from HL. Decomp isnt drilled or tapped.

Yours for the ride if you want it.

That's what I need, I will pm you. Thanks !

 

[SawTroll]

I understand that Mahle 46ZD5 can be either 45 or 46mm. The size is supposed to be printed in blue ink on top of the cylinder.

I wouldn't be surpriced if 44mm ones turned up as well.

 

[Magic_Man]

I understand that Mahle 46ZD5 can be either 45 or 46mm. The size is supposed to be printed in blue ink on top of the cylinder.

That's good info to know @SawTroll , regardless I can't beat the price.

 

[Jimmy in NC]

That one has a blue 46 still on it...along with some saw mung. I also always measure them.