FOUND IT Husqvarna 350 OEM cylinder

[M2theB]

Looking for good condition OEM cylinder.
45mm. Not sure if they came otherwise.
I’ve got the AV

looking for new piston and ring too

Thanks

 

[Woodslasher]

The solid type jug or one with removable transfer covers? I've got a good used 350 cylinder with the removable covers and a near-new (~1 minute of run time) oem piston for the same I'd be willing to cut loose. I was given a 350 that "didn't run" so I swapped out the dished piston for a new one, ground on the transfer covers a bit and reassembled the saw only to discover that the intake boot had started leaking so I set it aside. If you're interested I can pull the jug and get pics and we can discuss a price.

 

[M2theB]

Hey,
The one I have has the removable transfers
Going through it for a friend at FWHC

I’m interested

Thanks
Mike

 

[Woodslasher]

Hey,
The one I have has the removable transfers
Going through it for a friend at FWHC

I’m interested

Thanks
Mike

Bueno, I'll send you a pm later today or early tomorrow once I pull the jug and get some pics.