nv656
Well-Known OPE Member
- Local time
- 9:19 PM
- User ID
- 27693
- Joined
- Oct 14, 2023
- Messages
- 156
- Reaction score
- 224
- Location
- Nevada
A year or so ago I had a local buddy scan in and do a run of the large pnw felling
Spikes based almost exactly off the original example I had. I later sent my original to the fella on eBay and he tweaked it to
His liking. My Original example had some wear so these were only set to reproduce what we believed would be an exact match to one back in the day. Less pointy than the eBay ones and more true to original curves.
Anyways I had him run a small sheet of mild and small sheet of stainless on the water jet. If anyone’s interested in a set I have
Around 10 and 10. (More than I need) Selling at roughly cost 30$ for the mild 35$ for stainless (plus shipping) Can have the mild powder coated or Cera coated for additional $ and wait time. Stainless have yet to be finished but will have a straight
Grain brushed look.
Spikes based almost exactly off the original example I had. I later sent my original to the fella on eBay and he tweaked it to
His liking. My Original example had some wear so these were only set to reproduce what we believed would be an exact match to one back in the day. Less pointy than the eBay ones and more true to original curves.
Anyways I had him run a small sheet of mild and small sheet of stainless on the water jet. If anyone’s interested in a set I have
Around 10 and 10. (More than I need) Selling at roughly cost 30$ for the mild 35$ for stainless (plus shipping) Can have the mild powder coated or Cera coated for additional $ and wait time. Stainless have yet to be finished but will have a straight
Grain brushed look.
Attachments
Last edited:
