WANTED Husqvarna 2100/1100/2101 Pro safety HD wrap handle

[nv656]

Looking for the large oversize Full wrap handle for a Husqvarna 2100/2101.
in best shape possible or NOS
Similar to this

 

[Woodslasher]

Just an fyi, that's a Husqvarna 1100 wrap handle in the picture.

Also, the Pro Safety version came with a rubber wrap just the like 2100 wrap. The only real difference between a Pro Safety wrap and the oe is the PS wrap is ~1/8" or so larger in diameter than the standard 2100 grip, and the upper clutch side corner is rounded as opposed to being a sharp 90 degree bend. It'll look exactly like the PS 395 wrap shown below, just scaled slightly different. Dimensionally I don't believe the PS wrap is "oversize" compared to the oe.

Any particular reason you want that handle as opposed to the factory full wrap?

 

[ManiacalMark]

I imagine if you call them they will make one. I inquired about of they would make one for an ms880 and they came out with one months later.

 

[Woodslasher]

I imagine if you call them they will make one. I inquired about of they would make one for an ms880 and they came out with one months later.

They used to make them, a buddy has a n.o.s. 2100 wrap handle kit from them that he's hoarding.

 

[nv656]

I have a nos pro safety with the rubber but they supposedly also made the “HD” which is the one pictured and kicks the saw up higher to run the large bottom tooth dogs

 

[hacskaroly]

I imagine if you call them they will make one. I inquired about of they would make one for an ms880 and they came out with one months later.

That would be awesome if they did, my 2100's front handle has been around the block a few times and I don't want to pay $100+ for another well used handle...

 

[nv656]

That would be awesome if they did, my 2100's front handle has been around the block a few times and I don't want to pay $100+ for another well used handle...

If I find what I’m looking for I’ll sell you my nos one

 

[ManiacalMark]

They made them once upon a time so I’m sure they still have the jig.

 

[jacob j.]

They made them once upon a time so I’m sure they still have the jig.

At one time, Bryce had about 60 of them in his eBay store. It took three years for him to sell them all.

 

[nv656]

They used to make them, a buddy has a n.o.s. 2100 wrap handle kit from them that he's hoarding.

They made them once upon a time so I’m sure they still have the jig.

I am building a 2101 out of NOS parts, i will be using some old school large dogs I had a friend water jet on his table out of stainless as a exact replica to the parts saw I had (parted out) the large black handle will fit all 1100/2100/2101. Notice how it kick stands the saw up higher in the front to run the dogs vs the factory husqvarna wrap and the basic pro safety which I have in possession as well. The black wrap was not a factory option but a aftermarket “heavy duty” option.

 

[nv656]

If I can find a nice black handle to powder coat or nos I’d like to run it as that’ll alleviate the dogs from making contact on the ground first vs the other way around with the stock or basic pro safety one.