SOLD Echo CS590

[furb]

I picked this up to do a favor by fixing someones smashed saw. That favor wasn’t appreciated so here this sits. I’m out $80 plus and hour and a half or driving. The piston is scored, there’s a hole carved in the handle to hang it I guess. I’d like $100 plus shipping or $80 if you want to beat me down. The box will 20x10x12 and around twenty pounds if you want to estimate shipping. I’ll be using pirate ship from 19551. I’ll add a picture of the piston when I get back out to it. There might be a day or two shipping delay because of my work schedule. It could get parted out too if there’s enough interest to make it make sense.

 

[whitesnake]

Cheap work saw for someone. Shouldn’t last long. Glws.

 

[timg]

I heard @Duke Thieroff now has the 620 big bore kits for these available. Cheap horsepower.

 

[whitesnake]

I heard @Duke Thieroff now has the 620 big bore kits for these available. Cheap horsepower.

Cheap carbs as well

 

[furb]

I heard @Duke Thieroff now has the 620 big bore kits for these available. Cheap horsepower.

I was going to fix it but I keep fixing saws and not fixing my house before it gets really cold.

 

[timg]

I hear ya sir. House gotta come first. Hopefully you will get it sold and no touch, only a pack up.

 

[timg]

Cheap carbs as well

And improved idle circuits.

 

[Nutball]

I heard @Duke Thieroff now has the 620 big bore kits for these available. Cheap horsepower.

What's the port timing, stock?

And improved idle circuits.

On AM carbs or what? Tell me more

 

[timg]

Yes on the aftermarket carb he sells.
Don't have timing numbers currently on a stock saw @Nutball.

 

[Nutball]

I don't see a big bore, just an AM cyl kit. 590 & 620 are the same bore, which I think is 45mm already. It shouldn't be hard to make a big bore kit.

 

[timg]

I was down at his shop a couple of weeks ago for the raffle. He said these new big bore kits were coming available. I'm sure he will respond tomorrow @Nutball with more specific info.

 

[Smokealongthetracks]

I'll take it and give it away here in Asheville,NC please.

 

[earlthegoat2]

The big bore kits are available for pre-order to ship 1st quarter 2025

DUKE'S NIKASIL CYLINDER KIT FITS ECHO CS-620P, UPGRADES CS-590, CS-600P 45MM

QUALITY NIKASIL PLATED CYLINDER AND 2 RING PISTON UPGRADE YOUR CS-590 TO A CS-620 STYLE CYLINDER HIGH QUALITY NIKASIL PLATED CYLINDER WITH CHAMFERED PORTS AND 2 RING PISTON HEAVY DUTY REPLICA OF CS-620P CYLINDER. YOU CAN UPGRADE A CS-590 WITH THIS CYLINDER FITS ECHO CS-590 TIMBERWOLF, CS-620P...

www.sawsalvage.co

 

[whitesnake]

The big bore kits are available for pre-order to ship 1st quarter 2025

DUKE'S NIKASIL CYLINDER KIT FITS ECHO CS-620P, UPGRADES CS-590, CS-600P 45MM

QUALITY NIKASIL PLATED CYLINDER AND 2 RING PISTON UPGRADE YOUR CS-590 TO A CS-620 STYLE CYLINDER HIGH QUALITY NIKASIL PLATED CYLINDER WITH CHAMFERED PORTS AND 2 RING PISTON HEAVY DUTY REPLICA OF CS-620P CYLINDER. YOU CAN UPGRADE A CS-590 WITH THIS CYLINDER FITS ECHO CS-590 TIMBERWOLF, CS-620P...

www.sawsalvage.co

Nice, technically not a big bore kit as it’s still 45mm. It’s basically an aftermarket 620p top end. Not bad if you’re on a tight budget. Probably good for a beater blown up 590. Time will tell when they’re being used.

 

[timg]

Sorry guys, Haven't had time today to clarify with @Duke Thieroff on cylinder bore sizing. And I see he wasn't on here today. I know he did tell me big bore. I'll try to follow up over the weekend with Chris. My work is taking priority.

 

[Duke Thieroff]

Sorry guys, Haven't had time today to clarify with @Duke Thieroff on cylinder bore sizing. And I see he wasn't on here today. I know he did tell me big bore. I'll try to follow up over the weekend with Chris. My work is taking priority.

Hey Tim, I wouldn't have said big bore on that. Just CS-620 copy.

 

[timg]

Hey Tim, I wouldn't have said big bore on that. Just CS-620 copy.

Thx for the clarification. Just a flare up on my gramps classification. Dang it

 

[9050lx]

Anybody successfully running this cylinder?

 

[Clarkbug]

Did this saw ever get spoken for? The desire for spring to get here is giving me a bad case of CAD.....

 

[Woodpecker]

@mainer_in_ak