Wisconsin Welder
Super OPE Member
- Local time
- 4:43 PM
- User ID
- 7982
- Joined
- Nov 28, 2018
- Messages
- 284
- Reaction score
- 750
- Location
- S.E. Wisconsin
I have a large amount of Echo and Shindaiwa parts from a dealer that closed. All new, unused, in most cases still in the bag with a part number on it.
Gaskets, hardware, recoil parts, carb parts, filters, trimmer head parts, plastic parts like triggers and filter covers etc. I am still sorting this all out.
Some of these parts are 10-20 years old. Just putting the ad up to see if there was someone who would want
this stuff, they're mostly $1.00 to $20.00 parts, and they're for 2-stroke equipment that is anywhere from 1 to 25 years old that didn't cost much to begin with. Not sure there is a market for this, or this much of it (20 pounds)
You can message me here or text me at 262-327-0018
I will eventually make a spreadsheet with the part numbers and post it.
Gaskets, hardware, recoil parts, carb parts, filters, trimmer head parts, plastic parts like triggers and filter covers etc. I am still sorting this all out.
Some of these parts are 10-20 years old. Just putting the ad up to see if there was someone who would want
this stuff, they're mostly $1.00 to $20.00 parts, and they're for 2-stroke equipment that is anywhere from 1 to 25 years old that didn't cost much to begin with. Not sure there is a market for this, or this much of it (20 pounds)
You can message me here or text me at 262-327-0018
I will eventually make a spreadsheet with the part numbers and post it.
