SELLING Dolmar ps 460 #2

[Shane¹]

Got this dolmar 460 up when I picked that 350 and 510 up a while back. Finally got around to getting a clutch cover for it. Had some marks on the piston cleaned them up and put a new ring in it. Removed deflector and opened up muffler then welded deflector back on. Had a bad coil, found a Stihl coil that looked really similar bolted it up and it fired right up. Advanced timing a little bit seems to run really well. Was going to port these but have other projects going on now. Sprocket was really worn ground the spur down with carbide bit and now a rim sprocket fits nice will probably need a clutch drum if you plan on running it a lot. Looking to get $125 plus shipping. Can come with or without bar and chain

 

[Shane¹]

Here is a few pictures of the sprocket

 

[Wilhelm]

Bump for a good seller.

I got the other PS-460 from Shane.

 

[cuinrearview]

Details on the coil?

 

[Shane¹]

Details on the coil?

What do you want to know? I can send some pictures at some point

 

[cuinrearview]

What's it for/part number. Mounting. Would it run a 5105. Etc.

 

[Shane¹]

Id assume it would. May have to clock the flywheel some I think they changed the timing on them over the years didn't they? I'll pull the starter off sometime probably Friday and send you some pictures of it

 

[Shane¹]

Here is some pictures of the coil. I have not found what it is actually for yet. Maybe there is more numbers by the armature?

 

[cuinrearview]

Hey @lehman live edge slab , what's this from?

 

[Shane¹]

I think it might be a fs91r by pictures but I can't get the numbers on it to match any I can find on the Internet

 

[lehman live edge slab]

Hey @lehman live edge slab , what's this from?

Looks like 171/181 or 231/251 saw coil, could also be a hs 46 hedge trimmer coil all 3 look same as picture basically. May be very similar coils with slightly different internal timing and or different length plug lead.

 

[Shane¹]

There is so many but I don't see any pictures with the 1323 in the last number like on the picture of this coil

 

[Shane¹]

The 251 coil looks like it might be best if you want to try it I don't think they have a limiter at all