Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread

[Johnmn]

Ya buddy not made it! Hows it look?

Pretty good, there is a little over spray on it from something! But I think it will clean off with a little elbow grease.

 

[mettee]

Had a panic moment, lost the piston to my 7910 cylinder. Searched high and low, then remembered I left it in my car when I went to the shop last.

Ill keep track of it better now

 

[mettee]

My first Smurf experience.
View attachment 154244

How's she run

 

[mettee]

John, I have some extra low matte black covers I'll donate to you if you want. No offense I'm not a fan of the silver

 

[Johnmn]

John, I have some extra low matte black covers I'll donate to you if you want. No offense I'm not a fan of the silver

I'll take you up on that! I don't like the silver either.

How's she run

It runs good, first time I have ran a 6400. They pull well for being 64cc. But this one is getting a 52mm top end eventually!

 

[PA Dan]

They do run well at 64cc!

 

[RI Chevy]

Can that silver plastic cover be painted?

 

[PA Dan]

Can that silver plastic cover be painted?

Might be able to dye it?

 

[RI Chevy]

Yup. Good idea. I completely forgot about that. [emoji106]

 

[PA Dan]

Can that silver plastic cover be painted?

So you getting one?

 

[GCJenks204]

Can that silver plastic cover be painted?

Might be able to dye it?

If going to the larger P&C the decomp needs to move, cover will need to be replaced anyway.

 

[GCJenks204]

Three Stihl guys discussing Dolkita’s ...



And why can’t I find a face palm emoji???

 

[RI Chevy]

So you getting one?

I got me a 6100 already. Lol

 

[PA Dan]

I got me a 6100 already. Lol

How do you like it?

 

[RI Chevy]

Nice. Very different than what I am accustomed to. It's a MMWS 6100. Runs well. [emoji106]

 

[mettee]

I'll take you up on that! I don't like the silver either.

It runs good, first time I have ran a 6400. They pull well for being 64cc. But this one is getting a 52mm top end eventually!

PM me your address when you have a second, I'll send them out asap.

 

[PA Dan]

So what's the preferred carb on the upgraded 6421/7910's? I heard about some carb mods from @Poleman. Mine is a Zama that is below.

 

[mettee]

Pull that lower cover off and see if its a twin jet.

Then you can drill the jets based on the mods to your saw. Tutorial on one of these pages I posted from poleman.

Page 44

 

[NCFarmboy]

Can that silver plastic cover be painted?

Yes. I painted mine w/Rustoleum IIRC couple 4-5 years ago holding up very well. Did scrub em up w/red scotchbrite pad.
Shep

 

[dahmer]

Can that silver plastic cover be painted?

I painted one with Rustoleum plastic paint. I wet sanded it first, painted it then sprayed it with clear sealer. Came out pretty good.