Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread

[Backtroller]

Wish I could get my hands on a set of those. I'm not in love with the large dawgs.

View attachment 136182

I turned those big dogs into a loosely based 6100 spike. Used a 4” grinder.

 

[Backtroller]

The big spikes looked “cool” but my 28” bar shrunk

 

[Lightning Performance]

Hate it when muh bar shrinks

 

[Backtroller]

Yeah like cold water...

 

[Wilhelm]

Wish I could get my hands on a set of those. I'm not in love with the large dawgs.

View attachment 136182

I just made a Dolmar stuff purchase from Germany, I could have included a EU spike set had I known someone has interest in these.

Even though that opportunity passed I could still hook You up with a set since I have a spare one in my spare parts bucket.

I would have to ask for actual price plus shipping, if You are interested PM me.

Also, AJ @ajschainsaws should be able to hook You up with a set.

 

[Adamski]

Picked this up yesterday. Given it a good clean, it’s still grubby as. Previous owner used canola oil..

 

[Wilhelm]

Picked this up yesterday. Given it a good clean, it’s still grubby as. Previous owner used canola oil..

View attachment 136210

View attachment 136211

You need new decals/stickers!

Contact AJ, he's located in the UK.

Did the bar come with the saw?
The bar looks brand new, 36" I assume.

 

[mdavlee]

Orange too 7900 are the best looking ones ever.

 

[ajschainsaws]

My favorite saws ever. I sold my 7900 when I got my Solo... kinda wish I still had both.View attachment 135979
View attachment 135983

@Poleman @Miller Mod Saws

I think some of us been in that situation more than once

 

[Adamski]

You need new decals/stickers!

Contact AJ, he's located in the UK.

Did the bar come with the saw?
The bar looks brand new, 36" I assume.

It does need new decals, also do you know the paint code or RAL number for the orange? 30” and no it didn’t come with the saw. This saw was grim when I got it. But it all works. Just the dead mans trigger is missing the spring return.. I will over time get it as clean as possible. It needs some heavy degreaser to eat away at the welded on bar oil scum..

 

[Adirondackstihl]

Available OEM spikes

From left to right, ruler is metric, Dolmar part numbers:
- outer EU style , part # 957 250 060
- inner EU style , part # 038 250 020 / updated to part # 038 250 021
- outer US style 1 , part # 038 250 210 / updated to part # 038 250 212
- inner US style 1 , part # 038 250 200 / updated to part # 038 250 202
- outer US style 2 , part # 038 250 230 / updated to part # 038 250 232
- inner US style 2 , part # 038 250 221 / updated to part # 038 250 222

View attachment 136030

There is one more US style spike set, looks like the US style 2 but features shorter teeth!
I am uncertain as to whether they are still available nor do I know their part numbers.
Maybe someone can shed light on this.
@fordf150 , @166 , @ajschainsaws

EDITED due to further updated part numbers!
Also, the US style 1 spikes might be out of stock after all - it is kinda hard to follow availability when the shop redirects searches automatically to updated part numbers!

Depending on price, I’d like a set of the small spikes

 

[Wilhelm]

Picked this up yesterday. Given it a good clean, it’s still grubby as. Previous owner used canola oil..

View attachment 136210

View attachment 136211

Either a optical illusion or You are missing a recoil bolt.

Missing chain catch.

Love the look of the saw/bar combination!

 

[Adamski]

@ajschainsaws

Hi [emoji112]

What parts, decals etc do you have that might interest me for this dirty biatch

 

[Wilhelm]

Depending on price, I’d like a set of the small spikes

I can quote a price for a set right now, but I have to weigh a set to give a quote on shipping cost to the US.

I also point out that I have to ask what I get them for plus actual shipping, any less and it's out of my pocket.

I will post a price plus shipping "tomorrow" (about 8-10 hours from now).
Interested parties can additionally contact AJ and see if he can do a better price than me, I don't mind.

 

[Adamski]

Either a optical illusion or You are missing a recoil bolt.

Missing chain catch.

Love the look of the saw/bar combination! [emoji106]

No recoil bolt missing, just a chain catcher and the small bolt holding the chain brake mech cover on.

I like these power-match bars, bit heavy but tough as old boots

 

[Wilhelm]

@ajschainsaws

Hi [emoji112]

What parts, decals etc do you have that might interest me for this dirty biatch

980 115 672 - Dolmar PS-7900 , recoil assembly decal
980 115 705 - Dolmar PS-7910 , recoil assembly decal
980 116 004 - Dolmar , clutch cover decal

I don't know the part numbers for the Makita versions.

 

[Wilhelm]

No recoil bolt missing, just a chain catcher and the small bolt holding the chain brake mech cover on.

I like these power-match bars, bit heavy but tough as old boots

038 111 171 - chain catch
915 135 100 - bolt for the chain brake mechanism cover

 

[Woodpecker]

I can quote a price for a set right now, but I have to weigh a set to give a quote on shipping cost to the US.

I also point out that I have to ask what I get them for plus actual shipping, any less and it's out of my pocket.

I will post a price plus shipping "tomorrow" (about 8-10 hours from now).
Interested parties can additionally contact AJ and see if he can do a better price than me, I don't mind.

I'm interested if they aren't made of gold prices.

 

[David Young]

Meet Vurn. Wally has a cousin now. He also has a a sister. She's shy though.
View attachment 136187 View attachment 136188

Kenny she’s a bute.

You got the big top on her?

 

[Redfin]

Somewhere here or over on AS I ran across a nice technical drawing sort of pic that showed an easy way to time a 272 coil conversion and worked fine here on the first try.