WANTED D009 play setup

[Big1066ih]

Looking for a setup for gtg to go on mmws 394. Thanks

 

[chipper1]

You have a muffler modded work saw Seth lol.

 

[Dub11]

Looking for like a 16" bar or something?

 

[Big1066ih]

Looking for like a 16" bar or something?

I've got a regular 16" bar n square ground. looking for bar, chain n 9 or 10 pin sprocket to put on er

 

[Dub11]

But like what kind of bar? Mayhaps a 20" to help balance it and then with a rim that big you might have to mod the tail to fit.

 

[huskyboy]

I’m sure there are several members on here who would file you a nice “play” chain. A normal large mount husky 20” bar will be sufficient for what your looking to do. The old school roller nose bars are cool though. I think definitive dave sells the sprockets, they aren’t cheap... but you get what you pay for. I don’t have any issues with a 9 pin on 394/5/390/372 with fitment but it is tight. I would add a extra drive link to the chain imho.

 

[cus_deluxe]

I took a 20” powermatch, cut it down to fit on mine with a 10 pin and 60 drivers. That way i dont have to get 61dl chains made.

 

[mdavlee]

Cut the heel to match a 9 pin on a 20”. 16” is too close in a 12x12 for me.

 

[Big1066ih]

Anybody got a setup they want to part with? bar chain & sprocket? 9 or 10pin. I don't have time to modify a bar myself just want to get something to put on n go

 

[Lightning Performance]

Anybody got a setup they want to part with? bar chain & sprocket? 9 or 10pin. I don't have time to modify a bar myself just want to get something to put on n go

Could order you a new one and cut it but people usually decline or the sites get pissed at me for not being a sponser. It could be a new bar from Bruce here at OPE HLS Parts. The Cross, Raisman and Oregon bars are sold here and in stock most times. I do have a few used D009 Oregon bars available but not cut or listed for sale. One was in the pic in the bar thread on converting a tail to fit both Husky and Stihl. I bought some Raisman bars to cut and try. Same pic has that bar. The mount was a smaller type but the bar is just right for a 9 or 10 pin 60dl. A regular 24" is usually needed to cut it for 9 or 10 pin use. Considered making a pile of them but dont think they would sell quickly.

 

[Big1066ih]

Could order you a new one and cut it but people usually decline or the sites get pissed at me for not being a sponser. It could be a new bar from Bruce here at OPE HLS Parts. The Cross, Raisman and Oregon bars are sold here and in stock most times. I do have a few used D009 Oregon bars available but not cut or listed for sale. One was in the pic in the bar thread on converting a tail to fit both Husky and Stihl. I bought some Raisman bars to cut and try. Same pic has that bar. The mount was a smaller type but the bar is just right for a 9 or 10 pin 60dl. A regular 24" is usually needed to cut it for 9 or 10 pin use. Considered making a pile of them but dont think they would sell quickly.

PM me, I'm interested

 

[mdavlee]

I found my bars. 16 and 20” in husk mount. 20” was cut for a 10 pin on a 395

 

[Lightning Performance]

I found my bars. 16 and 20” in husk mount. 20” was cut for a 10 pin on a 395

Very cool. Will they make it to the tn gtg?

 

[mdavlee]

Not by me.

 

[Big1066ih]

How much ya got to get?

 

[mdavlee]

How much ya got to get?

16” is gone. 20” for $50? If that works send me a message