PAST CT fall GTG Nov 5th 2016

[drf256]

If anyone needs some 394 stuff I'll have a pile there. some extra tanks...full.wrap handles plenty of smalls.

I could use some 394 starters that are in decent shape....

@drf255 can I bring u a 394 case half? needs welding . ..
Oh...and I'll bring that 350 cylinder. you want any other 350.stuff ?

Not sure what I need on the 350, so hold off on that.

Bring the case and prep it as much as you can.

Does Dan have a Tig?

 

[Deets066]

My 372 will suffice against your 044s. my 394 should best everything but Lee's saws. lol

My 372 isn't that modded though....and running skip chain. we shall see how it does

Gunna have to beat the pink saw for bragging rights

 

[Mattyo]

Not sure what I need on the 350, so hold off on that.

Bring the case and prep it as much as you can.

Does Dan have a Tig?

The case half right now is scrap. If you can weld it, I can use it. in your spare time is all, no particular rush. A while ago you mentioned you wanted the cylinder head... so i'll bring it and you can decide then


Deeter, I don't need bragging rights ...my saws were not built for such things. still, we shall see we shall see

 

[MustangMike]

My 372 will suffice against your 044s. my 394 should best everything but Lee's saws

Matt, my 044 #1 and MS440 are not ported. FYI, when I put semi skip on the 044 I found the cut times to be a lot slower (by about 2 seconds in 19" Red Oak), so you may want to consider that.

What bar lengths are you running on your saws? I do have semi skip on my 36", but put full comp on everything else.

 

[Mattyo]

I run a 24 inch bar on my 372 a 28 inch bar on my 385 and a 36-inch bar on my 394

 

[malk315]

Hey Matt & Dan, I didn't see any Huskies taking me on in the 70 cc classes, and as I remember the dominant 90 cc saws also looked like Creamsickles!

Well Mike you will probably win but I've got my stock xtorq 372 but I'll be tossing on a @Moparmyway square ground 84Dl chain and curious to see if there is improvement! First square ground on any of my saws.

Sent from my XT1585 using Tapatalk

 

[Deets066]

Well Mike you will probably win but I've got my stock xtorq 372 but I'll be tossing on a @Moparmyway square ground 84Dl chain and curious to see if there is improvement! First square ground on any of my saws.

Sent from my XT1585 using Tapatalk

You'll be hooked

 

[Moparmyway]

Well Mike you will probably win but I've got my stock xtorq 372 but I'll be tossing on a @Moparmyway square ground 84Dl chain and curious to see if there is improvement! First square ground on any of my saws.

Sent from my XT1585 using Tapatalk

Make a bunch of cuts with a regular chain first, you'll have a good baseline !

 

[drf256]

I got a 25" mopar chain for my 026. Damn thing cuts like a 440 with that chain.

 

[Redfin]

Name tags for sure.

I'm gonna bring a pile of parts, husky 350, 372 and 394 stuff likely.


@Boozer i'll have some chains for ya

Mike Lee is looking for a 394 flywheel if you have one avaiable?

 

[paragonbuilder]

Hey Matt & Dan, I didn't see any Huskies taking me on in the 70 cc classes, and as I remember the dominant 90 cc saws also looked like Creamsickles!

I don't have any 70cc huskies, yet...but I've got a pretty strong 394 now [emoji6]

 

[paragonbuilder]

Not sure what I need on the 350, so hold off on that.

Bring the case and prep it as much as you can.

Does Dan have a Tig?

I don't Al.

 

[Mattyo]

I have a 395 flywheel...not an extra 394...sorry.

 

[drf256]

If it can be fixed I will try.

 

[Deets066]

I have a 395 flywheel...not an extra 394...sorry.

What's the difference between the two?
Timing?

 

[Mattyo]

395 has a different taper I think...and an integral key

 

[Mattyo]

You need a 395 crank to go with the 395 flywheel....but I think as a package it's a drop in replacement for 394.

 

[malk315]

Perfect weather for Fri / Sat / Sun yeah baby! Who's psyched? Let's do this!

Sent from my XT1585 using Tapatalk

 

[RI Chevy]

[emoji106]

 

[Deets066]

Perfect weather for Fri / Sat / Sun yeah baby! Who's psyched? Let's do this!

Sent from my XT1585 using Tapatalk

I am and I'm not even gunna be there