SOLD Complete jonsered 920

[Stump Shot]

What is parts availability like on what would need replacing?

Sounds interesting but I would need @Stump Shot or @huskihl agree to build it for me.

I think it's Kevin's turn.

 

[hseII]

The hard to find parts for these are brake parts, starter innards, air filters, vibration mounts, and 930-style covers if you want to make the switch.

They're great running saws - stock or modded. The ignition and clutch are pretty much the only parts shared with any Husqvarna saws (181/281/288).

Which covers are needed for a 930
Top End?

What’s different?

 

[hseII]

New price 100 plus shipping

I’ll take it.

 

[Funky sawman]

Sold

 

[jacob j.]

Which covers are needed for a 930
Top End?

What’s different?

The 930 had an upgraded air filter, intake manifold, and cover that uses two mounts on either side instead of a central mount through the middle of the filter.

A lot of guys with 920s make the upgrade if they can. It's not a huge performance upgrade but does make maintenance a little easier. There is a difference with the cylinder on the later 930s - the lower transfer ports extend all the way to the bottom of the cylinder. I have a service bulletin on it somewhere.

 

[huskyboy]

You can convert the 920 cylinder to 930 bottom fed without too much difficulty I would imagine.

 

[huskyboy]

920 style on left, 930 style on right

 

[hseII]

@SawDoc

 

[huskyboy]

I have a 910 cylinder here that looks almost identical to the 930. Except the lowers looked a tad smaller by eye and has a decomp on top. Interesting how they went back to the 910 style porting with the 930’s.

 

[hseII]

I have a 910 cylinder here that looks almost identical to the 930. Except the lowers looked a tad smaller by eye and has a decomp on top. Interesting how they went back to the 910 style porting with the 930’s.

 

[huskyboy]

I can’t remember if the 910 had a slab side piston or windows. I’ll have to check.

 

[hseII]

I can’t remember if the 910 had a slab side piston or windows. I’ll have to check.

That’s supposed to be for a 930.

 

[huskyboy]

That’s supposed to be for a 930.

I remember my 930 having windows. Wish I never sold that saw.

 

[hseII]

I’m going to move this saw.

It’s on the East Coast now & will come with a used piston as well as what’s above as it has been in the box since arriving to West Georgia.

$200 + shipping.

I’d like to just get what I have in it back.


Sent from my iPhone using Tapatalk Pro