WANTED Complete-ish Stihl 064 or early short cased 066

[S&S_Work_Saws]

I've decided I'd like to build myself a Stihl 064 or short cased 066. Really prefer an 064. I don't care if it's disassembled or complete. Running or not. Doesn't have to be a beauty queen but repairable and not beat to death. No broken or cracked cases please.

Thank you

 

[Mad Professor]

I've decided I'd like to build myself a Stihl 064 or short cased 066. Really prefer an 064. I don't care if it's disassembled or complete. Running or not. Doesn't have to be a beauty queen but repairable and not beat to death. No broken or cracked cases please.

Thank you

I might have one. What is your price range for a complete OEM one? P/C looks good. No sure if it runs?

 

[Bill G]

Around 1:30PM today a guy dropped off a complete 064. It needs a new home.
I will get pics later

 

[Powerstroke Cowboy]

If I didn't have a teal DCS7901, I'd be building an 064 as well. Good old muscle.

 

[Bill G]

The gentleman said it was his fathers and it got hard to start. They took it to a local dealer and the dealer told them it needed a piston. I have heard this before but in this case the top end is toast. The parts that I know of that are missing are one top cover screw, a muffler bolt, and the muffler heat shield.

 

[Bill G]

Pics.....

 

[Bill G]

More..............

 

[S&S_Work_Saws]

PM's being sent to both of you.

 

[Bill G]

I cannot explain what happened to the rear handle. It kinda looks like ole McGruff took a bite out of it

 

[Yukon Stihl]

I cannot explain what happened to the rear handle. It kinda looks like ole McGruff took a bite out of it


View attachment 456263

It is to finish off the cut if the saw dies

 

[Frognc97]

I have a early 066 short case saw oem all as far as I know if you are still looking

 

[S&S_Work_Saws]

I have a early 066 short case saw oem all as far as I know if you are still looking

I actually forgot this listing was still up. I never have bought one but I'm still casually looking.

 

[singinwoodwackr]

I actually forgot this listing was still up. I never have bought one but I'm still casually looking.

I can put a 064 project together…have most of the parts.

 

[singinwoodwackr]

I can put a 064 project together…have most of the parts.

Well, pulled a couple of the 1122 bins down today…been a while…
For 064s, I don’t have but 1 complete saw and a semi complete second.
I plan on building just one of these.
Other than that, a bunch of misc parts like AVs, trigger covers, boots, clutch drums, cranks, bearings, early filter covers including winter versions and the metal ones, recoils, oil pumps, throttle links, the orange portion of tanks, 5 case pairs and a couple halves. I got a pile of carcasses quite some time back and since none were anywhere near complete saws I stripped them down, kept what was usable and pitched the unrepairable junk.
My bad…

Same story for 066s and 1128 stuff.

 

[jacktheripper]

Well, pulled a couple of the 1122 bins down today…been a while…
For 064s, I don’t have but 1 complete saw and a semi complete second.
I plan on building just one of these.
Other than that, a bunch of misc parts like AVs, trigger covers, boots, clutch drums, cranks, bearings, early filter covers including winter versions and the metal ones, recoils, oil pumps, throttle links, the orange portion of tanks, 5 case pairs and a couple halves. I got a pile of carcasses quite some time back and since none were anywhere near complete saws I stripped them down, kept what was usable and pitched the unrepairable junk.
My bad…

Same story for 066s and 1128 stuff.

Got any flywheels? Mine has two broken fins.

 

[singinwoodwackr]

Got any flywheels? Mine has two broken fins.

View attachment 474575

Which one? I have dual keyed 1201s and some 1204s
Or, just break off the 3rd one to balance it out.

 

[jacktheripper]

Which one? I have dual keyed 1201s and some 1204s
Or, just break off the 3rd on to balance it out.

I’ll have to pull it to see. It’s the one that works with a universal coil, but I have the early style coil mount.