- Local time
- 5:30 AM
- User ID
- 450
- Joined
- Jan 8, 2016
- Messages
- 1,411
- Reaction score
- 5,236
- Location
- Kentucky
I have a nice 51 Husqvarna. PHO. All OEM except the muffler, the baffle was removed and the deflector was opened up. The clutch cover has a burn mark just under the exhaust but I'll put hvac high heat tape on it for insurance if requested. Saw runs and oils as it should. It appears to be a low hour saw.
150 lbs compression. Piston is spotless. 45mm open port cylinder. For $50 more if someone wants I'll deck the cylinder to set squish at .020 and/or cut a .035 popup. It's bone stock as is. $140 + shipping not to exceed $25. If shipping is more than $25 I'll cover the rest.
I'll post pictures of the piston tomorrow afternoon or if any other pictures are needed, let me know. I've got several of these 51's/55's to list but I'll start with this one and see what kind of interest is shown. I've said it many times before but the 51/55 is an underrated saw. Relatively light weight, very reliable.
150 lbs compression. Piston is spotless. 45mm open port cylinder. For $50 more if someone wants I'll deck the cylinder to set squish at .020 and/or cut a .035 popup. It's bone stock as is. $140 + shipping not to exceed $25. If shipping is more than $25 I'll cover the rest.
I'll post pictures of the piston tomorrow afternoon or if any other pictures are needed, let me know. I've got several of these 51's/55's to list but I'll start with this one and see what kind of interest is shown. I've said it many times before but the 51/55 is an underrated saw. Relatively light weight, very reliable.
