SOLD Clean Husqvarna 51

[GoBigBlue1984]

Have a nice 51 Husqvarna. PHO. All OEM except the muffler, the baffle was removed and the deflector was opened up. The clutch cover has a burn mark just under the exhaust but I'll put hvac high heat tape on it for insurance.

150 lbs compression. Piston is spotless. For $50 more if someone wants I'll deck the cylinder to set squish at .020 and/or cut a .035 popup. It's bone stock as is. $140 + shipping not to exceed $25. If shipping is more than $25 I'll cover the rest.

I'll post pictures of the piston tomorrow afternoon or if any other pictures are needed, let me know. I've got several of these 51's/55's to list but I'll start with this one and see what kind of interest is shown.

 

[GoBigBlue1984]

Sale pending

 

[nnero]

Hey i have a question. I am putting together a 55 and need the carb screws and fasteners for recoil cover. Do you have any extras to part with??

 

[67L36Driver]

II RC: I got a batch of four lengths of ten each of Stihl nylon patch 5mm from Definative Dave. Been using them in all sorts of things.[emoji106]

 

[67L36Driver]

II RC: I got a batch of four lengths of ten each of Stihl nylon patch 5mm from Definative Dave. Been using them in all sorts of things.[emoji106]

50 Rancher was the last one needed a couple.