SELLING Bunch of saws

[Stevetheboatguy]

Hey guys. I haven't been around for a while had some more important things going on. Haven't had any time to be on the net or play with saws. And that's why I'm posting these up. I don't want to keep hording them when someone can actually use them, or flip them.

Basically most of my non runners and a few that I just don't use. I will post pictures up as I dig them out and get prices on them as I look them over. If you need more information faster than I get it posted please call me please do not text. My work cell is eight one five two seven five thirty one sixty nine. Sorry for typing it out but I don't need people trying to text me at all hours.

Right not the list looks like a 066 or 660 that runs great but needs a pto bearing, about 10-12 345-350 huskys that are all in various stages of blown up. Two good running red lever 026's one exceptionally clean. A bunch of old poulan 3400-3700's and 245's. A bunch more that I can't remember off hand right now.

If you are local and want to come by make a deal and load your truck just let me know. I am wanting to clean out my work shed before fall.

Any questions feel free to call or send me a pm. Pm's will take me longer to reply to as my free time is extremely limited right now but I will do my best. Thank you.


Steven


@chipper1 hey buddy. I'll have pics up soon. Hopefully tonight and more tomorrow. Be patient they will be up before long

 

[chipper1]

Your funny man.
If anyone from Michigan needs me to grab something up from Steve and to bring it this way let me know as I'll be in his neck of the woods next week and could probably head up there.
GLWS, pictures always help , well sometimes lol.

 

[CsClimber]

PM sent for 066/660

 

[brad ruch]

I might be interested in a 350

Sent from my Pixel 2 XL using Tapatalk

 

[smcrow]

pm sent

 

[usmcbuckwild]

PM sent

 

[Stevetheboatguy]

Ok here is the start of the pics. All saws are raw I haven't cleaned any of them.

I will only ask for the actual shipping cost on any of these. Not marking it up. Figure $15-25 ea depending on how far you are. PaypPal friends and family or cash in person.

066





This saw was in service and running. It was brought to me for new crank seals clutch drum and half wrap. While doing the seals I noticed the pto side bearing inner race was spinning on the crank. The outter race was still tight in the case. They traded it to me for another 066 I had already serviced. Oem cylinder not sure on the piston.

$375 will include a set of cross bearings and a new hyway piston for the new owner to install. and I will make sure it has the cluch cover. I seem to have misplaced it. Or $350 no piston or bearings.


SOLD

 

[Stevetheboatguy]

Couple of junk echos.

Don't even know if they are fixable. But lots of good parts.

Sold

 

[Stevetheboatguy]

Jred version of the 345.

I'm going to take a loss on this one. I gave $100+ for it dohhhhhh. Chipper1 gifted me a perfect used oem replacement piston and cylinder for it. And it will go with to the new owner if they desire.

The left side rear av mount is loose. It may need a time sert in the tank to make a solid repair.
SOLD

 

[Stevetheboatguy]

Ne350

Blown but very clean

Sold

 

[Stevetheboatguy]

2nd ne350

Also very clean

Sold!

 

[Stevetheboatguy]

Oe350

Another clean one

Sold

 

[Stevetheboatguy]

345 lightly scored still runs

$75

 

[Stevetheboatguy]

345 runs perfect not scored. Only flaw is a minor crack in the clutch cover.

$125.

 

[Stevetheboatguy]

345 scored

$75

 

[Stevetheboatguy]

Jred. Two piece ignition, had spark when I checked it. Scored not sure if the jug will clean up. I believe the brake was working and intact but will confirm next time I'm out in the shed.

SOLD

 

[Stevetheboatguy]

1st 026. Good runner I took on trade.


Red lever fairly clean SOLD

 

[Stevetheboatguy]

2nd 026 good runner

Pretty clean red lever

SOLD

 

[Stevetheboatguy]

064 one of my personal favorite saws. Pulls like a freight train and is almost as light as a 372.

Staying here for now.

 

[Stevetheboatguy]

340 easy start. Ugly and rough but runs sweet for a small saw.

Mix matched screws and am ign coil just like it was when I got it. All I've done is run it and run it and run it.

$75.