Bar for 910E

[Sully4755]

Need a new bar for my Jonsered 910E. It has 10mm studs and was told a D009 mount will work but it does not. Any help will be appreciated.

 

[Gullet]

Bar Mount Pattern: 18

 

[Squareground3691]

Need a new bar for my Jonsered 910E. It has 10mm studs and was told a D009 mount will work but it does not. Any help will be appreciated.

What doesn’t work with bar , ? If it’s oil delivery that a easy fix , slot should work with large Husky mount,

 

[ErnieG]

Just need to grind 1mm off the D009 to fit the larger 10mm bar studs and your in business.

Ernie

 

[Sully4755]

What doesn’t work with bar , ? If it’s oil delivery that a easy fix , slot should work with large Husky mount,

The slot on a D009 is 9 mm The studs on 910E are 10MM I guess I could do what Ernie said and grind slot down

 

[Sully4755]

Just need to grind 1mm off the D009 to fit the larger 10mm bar studs and your in business.

Ernie

Thanks Ernie I think thats what I will do.

 

[ErnieG]

Sometimes a used bar will fit without grinding the spot but a new one your almost certain to have to take that 1mm off .

Ernie

 

[brushwacker]

I have a lightly used Oregon, .058 ga. 20 inch $25 + the ride.

 

[Squareground3691]

The slot on a D009 is 9 mm The studs on 910E are 10MM I guess I could do what Ernie said and grind slot down

Yup . a dremel tool is ur friend

 

[Sully4755]

I have a lightly used Oregon, .058 ga. 20 inch $25 + the ride.

Thanks,but I picked up a 32 inch bar that I will grind out slot to fit