WANTED A Dolmar 152/153 Crankshaft.

[Powerstroke Cowboy]

Howdy all,

I'm looking for a Dolmar 152 or 153 Crankshaft.

If you have one you want to part with, give me a shout.

Also, if you have one, but don't want to part with it, how about pulling some dimensions off it?


Thanks.

David

 

[jacob j.]

@av8or3

 

[mgr1]

Howdy all,

I'm looking for a Dolmar 152 or 153 Crankshaft.

If you have one you want to part with, give me a shout.

Also, if you have one, but don't want to part with it, how about pulling some dimensions off it?


Thanks.

David

What You gonna build?
152 & 153 have a different pto side diameter.

 

[Powerstroke Cowboy]

What You gonna build?
152 & 153 have a different pto side diameter.

I am looking to see if they can be made to fit in a 123/133/143 series saw.

Yes, the 152 has a bigger shaft on the PTO side. That could actually be a benefit for power holding.

 

[Ketchup]

9000 crank is a no-go?

 

[Powerstroke Cowboy]

9000 crank is a no-go?

Good question. I haven't checked to see if it would fit. But they are definitely built different.

 

[Shane¹]

I don't have a crank anymore it went to @Lee H a few years ago but flywheel side is definitely really similar pretty sure they use the same base flywheel and clutch is a press on like the 133 style saw so could work. My worry would be if there is enough case material to let the crank fit in the case

 

[Ketchup]

Crankshaft Dolmar 144 152 (144120000) | eBay

Course shaft cleaned. Part number 144120000 Â Manufacturer: Dolmar This item is compatible with the following manufacturer models: Dolmar 144 Dolmar 152 The image is an example image, as these are used parts the delivered parts may vary visually.

www.ebay.com

 

[Powerstroke Cowboy]

I don't have a crank anymore it went to @Lee H a few years ago but flywheel side is definitely really similar pretty sure they use the same base flywheel and clutch is a press on like the 133 style saw so could work. My worry would be if there is enough case material to let the crank fit in the case

That's what it looks like by pictures. That's what I am hoping.

There is a few ways to gain the clearance needed. Between the case and crank I would hope the needed clearance could be made.

Crankshaft Dolmar 144 152 (144120000) | eBay

Course shaft cleaned. Part number 144120000 Â Manufacturer: Dolmar This item is compatible with the following manufacturer models: Dolmar 144 Dolmar 152 The image is an example image, as these are used parts the delivered parts may vary visually.

www.ebay.com

Yes, I'm the only watcher of that crankshaft. I was hoping I could find.one closer to home. Plus one from a fellow forum member. If none show up I'll probably buy that one.

Thanks for the link though. I expected it to show up in this thread.

I appreciate any and all help and thoughts on the subject.

 

[Powerstroke Cowboy]

There's another one on the bay. But they want ship to the USA.

Sachs Dolmar 144 / 152 Kurbelwelle 144.120.000 / 144120000 | eBay

Eine Kurbelwelle von Sachs Dolmar. Kurbelwelle ist in Ordnung bei der Maschine waren die äusseren Kurbelwellenlager defekt! Passend für Sachs Dolmar 144 / 152. Das Teil ist gebraucht! Guter Zustand.

www.ebay.com

 

[Ketchup]

I figured. Hard to be a Dolmar guy and not be an Ebay vulture.

 

[Powerstroke Cowboy]

I figured. Hard to be a Dolmar guy and not be an Ebay vulture.

Nailed it! LOL

 

[jacob j.]

I figured. Hard to be a Dolmar guy and not be an Ebay vulture.

Everyone on this forum is a chainsaw vulture©®

 

[av8or3]

Can you use a 143 crank?

 

[Frank bierce]

I have a couple NOS cranks that I’m having a hard time id’ing. Do you have any pics of what you need?

 

[hacskaroly]

Everyone on this forum is a chainsaw vulture©®

I AM NOT!!!.....well, ok, maybe a little

 

[Powerstroke Cowboy]

Can you use a 143 crank?

Sorry! I thought I had replied to this. No, I do not need a 143 crank. Thanks for asking. I'll keep you in mind if the one I have is bad.

 

[Powerstroke Cowboy]

I have a couple NOS cranks that I’m having a hard time id’ing. Do you have any pics of what you need?

I don't, sorry! If you post pictures with the numbers maybe someone could help.

In post #10 there is a link to an ebay listing with a 152 crankshaft. The 153 will look the same, just a smaller pto shaft.

 

[jacob j.]

I have a couple NOS cranks that I’m having a hard time id’ing. Do you have any pics of what you need?

Frank - if you want to post a picture, I'll bet we can help ID them.