A Barrett brother with a Creamsicle?? The heck you say!

[Duane(Pa)]

Now you really have some catching up to do! She's all together and alive! Made a couple cuts but might have to swap out carbs. Here she is!

Sweet. Can you run a 194 on those?

 

[PA Dan]

Sweet. Can you run a 194 on those?

It's got a 194 on it Duane! But in the carbs defense it was a freeby from @big t double. I cleaned and rebuilt it but might need more than that!

 

[PA Dan]

And I'm not the best carb tuner! Lol!

 

[Duane(Pa)]

I will have the one Al took off the 026. It's not a 194 but it is a three screw. May be perfect for the lil guy?

 

[RIDE-RED 350r]

And I'm not the best carb tuner! Lol!

Oh come now, you got a handle on it

 

[PA Dan]

I will have the one Al took off the 026. It's not a 194 but it is a three screw. May be perfect for the lil guy?

I do have the WT22 came on it that I could go to. Will try a 194 off my 026 tomorrow if I cant get it to tune right. Thanks Duane!

 

[PA Dan]

Finally got a video of the 024. First tank and tuned to 12,400. Nice running little saw. I switched the carb to the AM 194 that I got from Dave. Pops on the second pull and starts on the third every time!

 

[RIDE-RED 350r]

Nice little saw Great job Dan!

 

[Tpagel]

Finally got a video of the 024. First tank and tuned to 12,400. Nice running little saw. I switched the carb to the AM 194 that I got from Dave. Pops on the second pull and starts on the third every time!

Looks good Dan.
Nice 1121
I have one of those carbs on a beater 026 and similar results; adjustments are easy and always starts well.

Sent from my SM-J327V using Tapatalk

 

[PA Dan]

Looks good Dan.
Nice 1121
I have one of those carbs on a beater 026 and similar results; adjustments are easy and always starts well.

Sent from my SM-J327V using Tapatalk

Thanks Travis and thanks again for the parts for my saw and Joe's! Cant wait to see his go through the rebuild!

 

[RIDE-RED 350r]

Well, thanks to some horse trading with my buddy PA Dan, I believe I have every single part I need to get this little 024 back to killin trees again. Thinking I'll be getting started on it tomorrow, hopefully try it out!

Stay tuned.

 

[PA Dan]

Well, thanks to some horse trading with my buddy PA Dan, I believe I have every single part I need to get this little 024 back to killin trees again. Thinking I'll be getting started on it tomorrow, hopefully try it out!

Stay tuned.

No way! Really?

 

[RIDE-RED 350r]

No way! Really?

Yessir! 394 assembly is stalled as I discovered a loose bearing pocket in the PTO side case half during assembly last night. I have one on the way though.

 

[PA Dan]

Well that's bad for the Husky but good for the 024! How's the build coming?

 

[RIDE-RED 350r]

Well that's bad for the Husky but good for the 024! How's the build coming?

394 or 024?

 

[PA Dan]

394 or 024?

Dont try that with me buddy!

 

[RIDE-RED 350r]

Dont try that with me buddy!

Hey! You stole my pic and used it against me! Foul! Lol!!!

I haven't touched the 024 yet. Had family stuff going on pretty much the whole day today. Gonna pack it all up and go down to Josh's barn tomorrow and start piecing it all together. Hopefully I have the torx tools required to do the job, as in long enough to reach cylinder bolts, etc. I think I do.

 

[PA Dan]

Hey! You stole my pic and used it against me! Foul! Lol!!!

I haven't touched the 024 yet. Had family stuff going on pretty much the whole day today. Gonna pack it all up and go down to Josh's barn tomorrow and start piecing it all together. Hopefully I have the torx tools required to do the job, as in long enough to reach cylinder bolts, etc. I think I do.

Dang thats what I forgot to throw in the box! I knew there was something!

 

[XP_Slinger]

Hey! You stole my pic and used it against me! Foul! Lol!!!

I haven't touched the 024 yet. Had family stuff going on pretty much the whole day today. Gonna pack it all up and go down to Josh's barn tomorrow and start piecing it all together. Hopefully I have the torx tools required to do the job, as in long enough to reach cylinder bolts, etc. I think I do.

I’ve got ya covered big bro

 

[RI Chevy]

Stihl simple!